Parts for your 2018 Mitsubishi Asx-Wiper blades

2018 Mitsubishi ASX wiper blades — what they do and when to replace them

The 2018 Mitsubishi ASX is factory-fitted with front windscreen wiper blades and a rear wiper blade. These are absolutely relevant service items. Technical sources such as the Mitsubishi Motors 2018 ASX Owner’s Manual (windscreen wiper/washer section) and the scheduled maintenance checklist identify wiper blades as standard equipment and routine maintenance parts.

On the ASX, wiper blades keep the view clear in rain, road spray, sea mist and light frost. They sweep water and grime off the glass so the driver can see hazards sooner and arrive safer. Because Australia and New Zealand throw everything from coastal salt air to alpine chill at a windscreen, healthy blades make a real difference — and they’re a simple, affordable fix when they wear.

Owners can expect typical sizes around 650 mm (driver), 400 mm (passenger) and 300–305 mm (rear) for the 2018 ASX, with a common hook-style arm up front. Always check the build date and arm type before ordering, as trims and accessories can vary. Beam or hybrid blades tend to give the quietest, most even pressure across the ASX screen.

Best practice is to inspect the wiper blades at each service (about every 12 months/15,000 km) and replace them every 6–12 months, sooner if they streak, chatter, squeak, or miss patches. Sun, ozone, and road grime harden the rubber, when that happens, wiping performance drops quickly — especially at night or in heavy rain.

• Clean the blades monthly with a damp cloth and a splash of washer fluid to remove road film.
• Never run wipers on a dry or dusty screen, use the washers first to protect the rubber edge.
• Top up washer fluid with a quality mix, a bit of metho helps reduce algae in the reservoir.
• When replacing, support the wiper arm so it can’t snap back onto the glass, a folded towel on the windscreen is cheap insurance.
• Fit the correct adapters securely and confirm the blades park and sweep without fouling the bonnet edge.

A fresh set of blades is one of the quickest ways to lift confidence in wet weather. For the 2018 Mitsubishi ASX, it’s a small service item that pays back every time the sky opens up.

Popular questions about 2018 Mitsubishi ASX wiper blades

What size wiper blades fit a 2018 Mitsubishi ASX?
Most 2018 ASX models take approximately 650 mm on the driver’s side, 400 mm on the passenger’s side, and 300–305 mm for the rear. The front arms are typically hook style. It’s smart to confirm sizes against the vehicle’s build plate or existing blades before buying.

If the car has aftermarket arms or a windscreen replacement, check clearance at full sweep and make sure adapters lock in firmly.

How often should the wiper blades be replaced in Australia or New Zealand?
Plan on every 6–12 months depending on exposure to sun and salt air. Inspect the edges monthly and at each service, swap them sooner if there’s streaking, juddering, or noise. Coastal driving and hot summers will shorten their life.

Regular cleaning can stretch the interval, but once the rubber hardens or nicks appear, replacement is the only fix.

Can the ASX use silicone wiper blades?
Yes. Quality silicone blades work well on the ASX and can last longer, especially in strong UV conditions. They often leave a light hydrophobic layer that helps beading in rain. The key is correct fitment and arm compatibility, beam-style silicone blades are a popular upgrade for quiet, even pressure.

Whether rubber or silicone, choose reputable brands and the correct length to avoid over-sweep or missed areas.