Parts for your 2023 Mitsubishi Asx-Wheel hubs

2023 Mitsubishi ASX wheel hubs

Wheel hubs are absolutely fitted to the 2023 Mitsubishi ASX. Technical sources including Mitsubishi workshop manuals (front and rear hub/bearing sections), Mitsubishi ASA parts catalogues, and, for the European 2023 ASX variant based on the CMF‑B platform, Renault Captur service documentation, all list front and rear hub and bearing assemblies for this model year. So, wheel-hubs are relevant parts on every 2023 ASX, whether it’s the long-running AU/NZ model or the EU rebadged version.

The wheel hub is the solid mounting point that the wheel bolts to, and it carries the wheel bearing so the wheel spins smoothly. On the 2023 ASX, the hubs work with sealed bearings and the ABS encoder/tone ring, so they’re key for quiet running, precise steering, and reliable ABS/ASC performance. If the hub or its bearing wears, the driver may hear a humming that rises with speed, feel play at the wheel, notice uneven tyre wear, or see the ABS light if the encoder signal goes wonky.

While the bearings are sealed-for-life and not a grease-and-repack job, they still benefit from sensible maintenance as part of routine servicing:

• Torque the wheel nuts correctly after tyre rotations to avoid warping the hub/rotor face.
• Listen for new road-speed hums and check for play when the car’s on a hoist.
• Inspect ABS wiring and the magnetic encoder area when doing brakes, keep metal filings away from the sensor face.
• After heavy water crossings or pressure-washing, keep an ear out for early bearing noise.

Replacement approach varies by axle and variant. Many ASX setups use a unitised rear hub and bearing assembly that bolts on, while the front can be a hub flange with a press-fit bearing in the knuckle. Either way, correct procedures matter: use a press where specified, don’t hammer on the inner race, clean the hub face and knuckle, and always follow the workshop manual for torque values (especially the axle nut on front-drive models). A proper on-car runout check when refitting rotors helps keep brake shudder at bay. With quality parts and the right torque, a new hub/bearing should deliver years of quiet, drama-free kilometres.

Popular questions

How long do wheel hubs last on a 2023 ASX?
With normal driving and good tyre maintenance, sealed hub/bearing units commonly run well past 100,000 km. Harsh roads, big potholes, curb strikes, oversized wheels, or frequent water immersion can shorten their life.

What are the tell-tale signs a hub or bearing is failing?
A steady humming or growl that changes with speed, slight steering vibration, ABS warning lights, and play when the wheel is rocked at 12 and 6 o’clock are the big giveaways. Tyre cupping can also show up if a bearing has developed excess play.

Can the bearings be greased or adjusted?
No. The 2023 ASX uses sealed bearings that aren’t serviceable. If noise or play is confirmed, the correct fix is replacement of the bearing or the complete hub assembly as specified for that axle.