Parts for your 2020 Ford Everest-Shock absorbers

Maintaining and Replacing the Shock Absorbers on Your 2020 Ford Everest

The 2020 Ford Everest is a robust and versatile vehicle, designed to tackle various terrains with ease. To ensure a smooth and comfortable ride, one key component of the suspension system is the shock absorber. These critical elements play a vital role in controlling the impact and rebound movement of your vehicle's springs and suspension, essentially keeping the tyres in contact with the road at all times. Proper maintenance and timely replacement of shock absorbers are crucial to keeping your Everest at peak performance.

Let's delve into some practical advice on maintaining and replacing the shock absorbers on your 2020 Ford Everest. Ensuring these parts are in top condition not only enhances safety but also prolongs the life and comfort of your ride.

Firstly, it's important to recognise the common signs that indicate the need for shock absorber maintenance or replacement:

• Unusual vibrations: If you notice excessive vibrations while driving, especially on smooth roads, it might be a sign that your shock absorbers are worn out.
• Nose diving: When braking, if the front end of your vehicle dives more than usual, it could indicate that the front shock absorbers are no longer working effectively.
• Uneven tyre wear: Shock absorbers help in maintaining even tyre wear. If you notice uneven patterns on your tyres, it might be time to inspect your shock absorbers.
• Increased stopping distance: Worn shock absorbers can increase the time and distance it takes to stop your vehicle.
• Fluid leaks: If you see oil or fluid on the outside of the shocks, it's generally a sign of failure.

Replacing shock absorbers, typically every 80,000 to 100,000 kilometres, ensures that your vehicle's handling and safety are not compromised. Here's a step-by-step guide to handling shock absorber replacements as part of your Ford Everest servicing routine:

1. Gather Tools and Equipment: You'll need a jack, jack stands, a wrench set, and new shock absorbers. Always ensure your vehicle is secure and supported before starting the process.
2. Remove Wheels: For easy access, the wheels must be removed. Loosen the lug nuts, lift the vehicle with a jack, secure with jack stands, and then fully remove the wheels.
3. Remove Old Shock Absorbers: Depending on whether you're working on the front or rear, locate the bolts that hold the shock in place. One typically connects to the suspension arm, and the other to the body. Carefully remove these bolts and slide the old shock absorber out.
4. Inspect Mounts and Bushings: Check for any wear or damage on the mounts and bushings. They may need replacement to prevent further issues down the track.
5. Install New Shock Absorbers: Position the new shock absorber in place, ensuring it's the correct orientation, and secure it with the mounting bolts. Avoid over-tightening which can cause damage to the new parts.
6. Replace Wheels and Lower Vehicle: Once the new shocks are securely in place, replace the wheels, tighten the lug nuts and carefully lower the vehicle back to the ground.
7. Test Drive: A short drive around the block or over varied terrain will help ensure everything is working as it should and that your Everest is performing smoothly.

The lifespan of shock absorbers can vary based on factors such as driving conditions, load weight, and general vehicle usage. Regular inspections during your service intervals provide a valuable opportunity to catch issues early. If you prefer not to undertake this task yourself, professional automotive services are equipped to handle shock absorber replacements efficiently.

Investing time in maintaining the shock absorbers on your 2020 Ford Everest ensures that your vehicle can handle whatever comes its way while delivering a comfortable and safe driving experience. Keeping your Everest's suspension system top-tier isn't just about performance - it's about reliability, safety, and maximising the enjoyment of every journey.