Parts for your 2019 Mitsubishi Asx-Pedal pads

2019 Mitsubishi ASX pedal pads — what they do and when to replace them

Pedal pads are absolutely relevant and fitted to the 2019 Mitsubishi ASX. Technical sources back this up: the Mitsubishi ASX/RVR service manual specifies inspecting the brake pedal pad for wear, the Mitsubishi ASA/CAPS electronic parts catalogue lists a dedicated brake pedal rubber for GA‑series ASX, and both the NZTA Vehicle Inspection Requirements Manual (VIRM) and Australian roadworthy/roadworthiness guidelines call for non‑slip brake (and clutch, if fitted) pedal surfaces. On the ASX, automatics have a replaceable brake pedal pad, and manuals have replaceable brake and clutch pedal pads, the accelerator is typically an integral plastic pedal without a removable rubber cover.

On this model, the pedal pads are the grippy rubber covers that sit over the metal pedal faces. Their job is simple but crucial: keep the driver’s foot planted, even when it’s wet, muddy, or the soles are a bit slick. They also add a touch of comfort and help dampen vibration underfoot. Over time, rubber hardens and wears smooth, which can reduce traction and increase stopping distance in a panic stop—exactly why inspections are called out in service information and roadworthiness checks.

When looking after a 2019 ASX, a quick look at the pedal pads should be part of every service. If the rubber is shiny, cracked, torn, feels hard, or the pad is starting to shift on the pedal, it’s time to replace. Drivers who work in wet or dusty conditions may see faster wear. There’s no fixed interval—most last several years—but regular checks at each service are smart.

• When to replace: smooth/glazed surface, visible cracks or chunks missing, pad feels loose, or contamination that won’t clean off.
• What to avoid: silicone dressings or tyre shine on pedals—these make them slippery and can trigger a WOF/RWC fail.

Replacement is a straightforward, low‑cost job. The worn pad pulls off, the new one stretches over the pedal face. A wipe of warm soapy water helps it slide on, then it grips as it dries. Make sure the lip is fully seated all the way around and that floor mats don’t interfere with pedal travel. For manual ASX models, change the clutch pad at the same time so pedal feel and grip stay consistent. Genuine or known‑quality aftermarket pads are recommended—they’re moulded to fit and use the right compound for long‑term grip.

Popular questions about 2019 Mitsubishi ASX pedal pads

Do 2019 ASX models have replaceable pedal pads?
Yes. All 2019 ASX variants have a replaceable brake pedal pad. Manual models also have a replaceable clutch pedal pad. The accelerator is usually an integral assembly without a separate rubber cover.

How often should pedal pads be replaced on a 2019 ASX?
There’s no fixed time or kilometre interval. They should be inspected at every service and replaced when the rubber is worn smooth, hardened, cracked, loose, or contaminated. Many last several years, but high‑use or wet conditions can shorten life.

Can worn pedal pads cause a WOF/RWC fail?
They can. NZTA VIRM guidance and Australian roadworthy checks require pedals to be non‑slip and in good condition. A smooth or damaged pad can lead to a fail and should be replaced promptly for safety.