Your Selected Vehicle
Parts for your 2017 Haval H6-Headlights
Explore 4WD & Adventure
OEX Engine Shut Down Solenoid 12V - Pull Rating 10.9Kg/cm2 1751 Series - ACX3332
Fitment Notes:
OEX Engine Shut Down Solenoid 12V - Pull Rating 16.8Kg/cm2 2370 Series - ACX3336
Fitment Notes:
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 100m Roll (NZ Ref. 157) - ACX0811L
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
OEX 10mm Twin Core Automotive Cable, Red/Black, With Clear Sheath - 30m Roll - ACX0823
Fitment Notes:
Cole Hersee 500A Dual Pole Master Disconnect Switch, 48V DC Yellow Handle - TR Series - 880175-0002BX
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
LED Autolamps Traffic Advisory Light Green LED 12v Only Green Lens 10cm Cable Boxed - 83G
Fitment Notes:
Guiding Your Way: Maintaining and Replacing Headlights on Your 2017 Haval H6
Headlights play a crucial role in ensuring safety while driving, particularly during night-time or adverse weather conditions. For owners of the 2017 Haval H6, keeping your vehicle's headlights in pristine working order should be a top priority to ensure safe travels.
If your Haval H6's headlights seem dimmer than usual or don't illuminate correctly, it might be time to replace them. Treat the headlight replacement as part of the regular maintenance schedule. This can prevent unexpected failures and maintain your vehicle's overall lighting performance.
The first step in changing the headlights on your Haval H6 is sourcing the correct type of bulbs. You'll want to confirm the specific bulb type for your vehicle. Once you have the right bulbs, gather any necessary equipment such as screwdrivers or a socket wrench. It's also a good idea to have gloves on hand to avoid damaging the bulb with oils from your skin.
Here's a general guide to replacing the headlights:
- Ensure that your 2017 Haval H6 is parked on a flat surface with the engine off and keys removed from the ignition.
- Open the bonnet and locate the back of the headlight assembly.
- Disconnect the electrical connector from the headlight bulb by gently pushing and pulling it out.
- Remove the bulb by turning it counter-clockwise and pulling it straight out from the socket.
- Insert the new bulb into the socket and turn it clockwise to secure it in place.
- Reconnect the electrical connector to the bulb.
- Close the bonnet and test the new headlights to confirm they're operating correctly.
Aside from replacement, headlights may also require cleaning or polishing to remove oxidation or cloudiness, which can reduce visibility. Using a headlight restoration kit can clear up fogging and improve their effectiveness without a hitch. Remember, adjusting headlights so they aim properly is crucial after any bulb change or cleaning to ensure optimal visibility and avoid dazzling other drivers.
If you're uncertain about performing these tasks yourself, or if you've any doubts about the process, seeking professional assistance from a local automotive specialist is recommended. They'll provide guidance and expertise to make sure your headlights are performing correctly, keeping you safe on the road.
Regular checks, cleaning and when necessary, replacements, are part of the simple yet essential rituals that keep your vehicle safe and roadworthy.