Parts for your 2017 Ford Fiesta-Coil springs

2017 Ford Fiesta — Coil Springs

Coil springs are absolutely relevant and used on the 2017 Ford Fiesta. Technical references including the Ford Workshop Manual (Front Suspension 204-01 and Rear Suspension 204-02), Haynes Ford Fiesta 2008–2017 guide, and professional data services (e.g., Autodata/AllData) specify a MacPherson strut front suspension with coil springs and a rear torsion (twist) beam with separate coil springs.

On the 2017 Fiesta, the coil springs do the heavy lifting of supporting the vehicle’s weight and keeping the tyres pressed to the road over bumps, ruts and the odd surprise pothole. Up front they sit around the strut, at the rear they work with the beam axle to balance comfort and control. The result is the Fiesta’s tidy, nimble feel—exactly what owners expect from a light hatch used around Aussie and Kiwi roads.

As part of routine servicing, it pays to have the coil springs inspected for corrosion, cracked paint, broken ends and sagging ride height. A car that sits low on one corner, clunks over speed humps, or feels floaty and noisy over rough patches may be hinting at a fatigued or fractured spring. Because the springs and shocks work together, worn shocks can make springs work harder, so a mechanic should assess both at the same time.

Replacement best practice is to fit springs in axle pairs (both fronts or both rears) to keep the car level and handling consistently. Quality aftermarket or OE-spec springs matched to the correct Fiesta variant (engine, trim, and ride height) will maintain proper clearance, headlight aim and stability control calibration. After front spring or strut work, a wheel alignment is recommended to keep tyre wear even and steering sweet.

Anyone tackling the job should use a proper, quality spring compressor and follow workshop procedures—stored spring energy can be dangerous if released suddenly. A technician will also check strut mounts, bearings, isolators and seats, replacing any perished rubber so new springs don’t develop creaks or knocks. In coastal areas, extra attention to surface rust and paint chips on the coils helps prevent future breakages.

• Watch for uneven ride height, knocks over bumps, or a harsher ride.
• Replace in pairs and align the front after fitting.
• Inspect mounts, seats and shocks while you’re there for a proper fix.

Popular questions about 2017 Ford Fiesta coil springs

How long do coil springs last on a 2017 Fiesta?

There’s no fixed interval—many last well over 150,000 km. Lifespan depends on road conditions, load, and exposure to corrosion. Regular inspections during servicing will spot chips, rust or cracking before they fail.

Should coil springs be replaced in pairs?

Yes. Replacing both fronts or both rears keeps ride height even and handling predictable. Mixing an old spring with a new one on the same axle can cause the car to sit unevenly and steer oddly under brakes.

Do I need a wheel alignment after replacing coil springs?

If front springs or struts are removed, get an alignment. Ride height changes can shift camber and toe, and a quick alignment keeps the steering straight and prevents premature tyre wear.