Your Selected Vehicle
Parts for your 2016 Nissan Navara-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2016 Nissan Navara interior bulbs: what they do and how to look after them
Interior bulbs are absolutely fitted to the 2016 Nissan Navara (D23/NP300). Technical sources including the 2016 NP300 Navara Owner’s Manual and the D23 Service Manual (Lighting section) list the cabin “room/dome” lamp, map/personal lights and the cargo lamp among the vehicle’s interior illumination. These documents outline serviceability and removal/refit procedures, confirming the part is relevant to this model year.
These bulbs light the cabin when doors open, help with map reading or phone charging at night, and make the rear seat and footwells usable after dark. On utes, the cargo lamp above the tray is handy for loading gear at dusk. They’re small, simple and often overlooked, but when they’re out, you notice fast.
Depending on trim, the Navara uses conventional incandescent bulbs (commonly W5W/T10 wedge and 31–36 mm festoon) or factory LED modules for some locations. Many owners upgrade to LED for brighter, whiter light and lower current draw. If your vehicle has factory LED modules, the “bulb” is part of the lamp assembly, replacement means swapping the whole unit, which the service manual also notes.
- Switch off the lights and ignition, and let hot bulbs cool.
- Use a plastic trim tool to gently pop the lamp lens or assembly as shown in the manual.
- For wedge or festoon bulbs, pull the old bulb straight out. Avoid touching new bulbs with bare fingers.
- Install the new bulb. If using LEDs, check polarity, flip it if it doesn’t light.
- Refit the lens, test door-activated and manual-on functions, and you’re done.
- Inspect interior lights at service time or before trips. Replace dim, flickering or cracked bulbs promptly.
- If multiple interior lights are dead, check the “ROOM LAMP”/interior lamp fuse and door switches per the manual.
- For cargo lamps exposed to the elements, look for water ingress at the lamp housing before blaming the bulb.
- Upgrading to quality CANbus-compatible LEDs reduces the chance of flicker or warning behaviour.
- Not sure on fitment? Match by VIN in a parts catalogue or check the markings on the original bulb.
Most interior bulb jobs take 10–20 minutes with basic tools. If a lamp won’t come back to life after a new bulb and fuse check, a quick look by an auto sparky can save time.
Popular question: What bulb types fit the 2016 Navara’s interior lights?
Most 2016 Navara trims use a mix of W5W (T10) wedge and 31–36 mm festoon bulbs for the dome, map/personal and some courtesy lights. Some variants use factory LED modules that don’t take a separate bulb. The safest bet is to confirm against the owner’s manual or match the originals by size and base before buying.
Popular question: Can the interior bulbs be upgraded to LED?
Yes, many owners swap the wedge and festoon bulbs to LED for brighter light and lower power draw. Choose CANbus-friendly LEDs to avoid flicker. If your Navara has factory LED modules, you’d replace the entire lamp assembly rather than a single bulb. LED upgrades are generally fine in AU/NZ for interior use, but use good-quality parts to avoid glare or odd behaviour.
Popular question: Why do my interior lights stay on or not come on?
Common causes are the interior light switch set to ON or OFF, a misadjusted door switch, a blown ROOM/interior-lamp fuse, or a failed bulb. If all lights are out, start with the fuse and a known-good bulb. If only one lamp misbehaves, check its bulb and contacts, or the cargo lamp housing for moisture.
