Your Selected Vehicle
Parts for your 2016 Mitsubishi Asx-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Understanding and Maintaining Tail-Lights on the 2016 Mitsubishi ASX
The 2016 Mitsubishi ASX, like most modern vehicles, is fitted with tail-lights. Tail-lights are an essential part of the car's lighting system, playing a crucial role in road safety. These lights are mounted at the rear of the vehicle and serve to indicate the presence and position of the car to other drivers when visibility is reduced, such as during night-time driving, fog, or heavy rain.
Tail-lights are designed to illuminate whenever the headlights or parking lights are switched on. Their purpose is to make the vehicle visible from behind and prevent accidents by helping following drivers judge distance and speed more accurately. On the 2016 Mitsubishi ASX, tail-lights are integrated with the brake lights and often the turn signals, creating a clear and cohesive rear lighting setup.
Taking good care of the tail-lights on your Mitsubishi ASX is quite straightforward but important. Over time, exposure to the elements, wear and tear, and minor impacts can affect their function. For instance, lenses can become cloudy or cracked, bulbs can blow out, and wiring connections might corrode or loosen.
When servicing the tail-lights on a 2016 Mitsubishi ASX, there are a few key maintenance and replacement tips to keep in mind:
- Regularly Inspect Tail-Light Lenses: Check for any cracks, chips, or clouding on the lenses. Damaged lenses can reduce the effectiveness of the lights and may let moisture in, which can cause electrical issues or bulb failure.
- Test Tail-Light Function: Periodically test your tail-lights to ensure they illuminate correctly. It's a good habit to have a friend check the lights while you turn them on, or park in front of a reflective surface to see their brightness.
- Replace Bulbs When Needed: Socket bulbs used in tail-lights don't last forever. If you notice one is out, replacing it promptly is essential for legal and safety reasons. The 2016 Mitsubishi ASX uses standard automotive bulbs, which are easy to source from most parts stores.
- Clean Lenses to Maintain Visibility: Dirt, grime, and road salt can build up on the lenses and dull the light output. A simple clean with soap and water can help keep the tail-lights bright and visible.
- Check Electrical Connections: Loose or corroded wiring can cause flickering or intermittent light function. During servicing, ensure that all wiring harnesses and connectors are secure and free from corrosion.
If a replacement is necessary, the process for changing tail-light bulbs on the 2016 Mitsubishi ASX is relatively easy. The tail-light assembly can be accessed from inside the rear hatch or trunk area. Removing a couple of screws or retaining clips allows you to pull out the assembly for bulb replacement or lens repairs. Using genuine Mitsubishi parts or high-quality aftermarket bulbs can guarantee longevity and compatibility.
For those who might be considering upgrading, LED tail-lights are becoming popular for their better illumination, energy efficiency, and longer lifespan. While the 2016 ASX might come with standard bulbs, switching to LED replacements can be a worthwhile upgrade, but it's important to ensure the electrical system is compatible or that the new lights come with built-in resistors to prevent issues like hyper-flashing or error codes.
Keeping tail-lights in good working order on the Mitsubishi ASX not only ensures safety but also helps you stay on the right side of the law. Many Australian road safety regulations require all external lights, including tail-lights, to be functional and visible. Faulty tail-lights can lead to fines or failed vehicle inspections.
In day-to-day driving, tail-lights may not get much thought but when it's dark or conditions are wet and visibility is low, their role becomes very clear. They are a simple but critical safety feature that helps everyone on the road.
So the next time the ASX is in for a service, make sure the tail-lights get a quick check. It takes only a moment but could save a lot more than just a repair bill down the line. After all, a well-maintained car means a safer drive for everyone.