Parts for your 2016 Ford Falcon-Engine mount

Engine Mount Replacement and Maintenance for Your 2016 Ford Falcon

The 2016 Ford Falcon, like most vehicles, is indeed fitted with engine mounts. These crucial components play a significant role in your vehicle's performance and comfort. Engine mounts are designed to secure the engine to your car's chassis while effectively dampening vibrations and noise that the engine generates. Over time, these engine mounts can wear out or fail, leading to a range of potential issues such as increased vibrations, unusual noises, and even engine misalignment. Regular maintenance and timely replacement of engine mounts is an important part of servicing your 2016 Ford Falcon.

Understanding the condition of your engine mounts is essential. When they are functioning correctly, you probably won't even notice they're there. However, worn or damaged engine mounts can be quite noticeable. Here's what you need to keep an eye on:

1. Increased Vibrations: One of the first signs of worn engine mounts is an increase in vibrations felt inside the cabin. These vibrations are most noticeable when starting the engine or idling.
2. Engine Movement: If the engine mounts are too worn or damaged, you may notice the engine shifting more than it should when you accelerate or decelerate. This could lead to other mechanical issues if not addressed promptly.
3. Unusual Noises: Clunks, bangs, or any unusual noises during driving, especially when taking corners or over bumps, can indicate failing engine mounts.

If you notice any of these symptoms, it's time to consider checking your engine mounts. Maintenance and inspection of engine mounts should ideally be part of your routine service checks. Mechanically-inclined owners can inspect the mounts visually for cracks, breaks, or oil contamination, which can deteriorate the rubber components. However, getting a professional mechanic to take a look is often a good idea, as they can assess the mounts under load and during operation, which isn't possible with a simple visual check.

Replacing an engine mount on the 2016 Ford Falcon can vary depending on which mount requires replacement and the accessibility. It's generally advisable to replace all mounts at the same time if budget allows, as they typically wear out at a similar rate. Here is a basic guide to the process:

1. Secure the Vehicle: Ensure the car is parked on a flat surface and use a jack and stands to ensure the car is safely elevated.
2. Locate the Engine Mounts: The Ford Falcon typically has several engine mounts strategically positioned to support the engine. They are usually made of rubber and metal to absorb vibrations.
3. Remove the Mounts: After supporting the engine from underneath with a jack (use a block of wood to prevent damage), proceed to unbolt the old mounts. You might need penetrating oil to loosen rusted bolts.
4. Install New Mounts: Position the new mounts correctly ensuring alignment. Then, secure the mounts using bolts but avoid over-tightening as it could damage them.
5. Test Drive: Once everything is back in place, take the car for a test drive to ensure everything is functioning smoothly and that vibrations and noises have been resolved.

Maintaining your Falcon's engine mounts is not just about comfort - it's about preventing larger mechanical issues down the line. If you find that your engine mounts need attention, don't delay. Replacing them could save you from more costly repairs in the future. If DIY isn't your thing, professional services at your local garage can perform the inspection and replacement efficiently.

A little attention to your engine mounts can go a long way in enhancing your driving experience. Whether you're smoothing out a bumpy ride or safeguarding engine components from unnecessary strain, keeping those mounts in tip-top shape is an investment in your Falcon's longevity and performance.