Parts for your 2015 Mitsubishi Lancer-Wiper refills

2015 Mitsubishi Lancer wiper refills — fitment, purpose and service tips

Based on Mitsubishi technical literature and industry application guides, wiper refills are applicable to the 2015 Mitsubishi Lancer (CJ/CF). The Mitsubishi Lancer Owner’s Manual for this model year details replacement of the wiper blade rubber inserts, and the Mitsubishi Service Manual (Wiper and Washer section) includes procedures for “wiper blade rubber” replacement. Major application guides from Australian/NZ suppliers (e.g., Trico and Bosch) also list refill inserts for the Lancer’s hook-arm, framed blades. So yes — wiper refills are relevant and used on the 2015 Lancer.

On this Lancer, wiper refills are the rubber inserts that slide into the existing blade frame, restoring quiet, streak-free wiping without replacing the whole blade assembly. It’s a tidy, budget-friendly way to keep the windscreen clear in Aussie and Kiwi conditions, where UV, salt air, dust and sudden downpours are common.

Typically, the front sizes are about 24 inches (driver) and 18 inches (passenger). Sedan models don’t have a rear wiper, Sportback variants usually do, and a matching rear refill is available. Always confirm length and profile against the old insert or the owner’s manual.

For best results, drivers should plan on replacing refills every 6–12 months or 10,000–15,000 kilometres, sooner if they see the tell-tale signs below. A quick monthly clean helps too: wipe the rubber with a damp cloth and a splash of washer fluid, and rinse the windscreen to remove road film. Avoid running the wipers on a dry glass, and don’t chip away at frost or heavy grime with the blades — that damages the edge.

• Signs it’s time: streaks or hazing, squeaks or chatter, split or jagged edges, poor performance at highway speeds.
• Replacement tips: match insert length and rail width/profile, slide the old insert out from the locking tab, transfer/retain any metal rails as required, and feed the new rubber in the same direction until it locks.
• When to choose full blades: if the frame is bent, the spoiler is loose, the joint is sloppy, or you’re upgrading to a beam-style blade that doesn’t take refills.

Quality OEM-style natural rubber refills deliver original wipe feel, premium silicone options can last longer and bead water nicely. After fitting, test with washer fluid and check the sweep for uniform contact. Simple, affordable and effective — wiper refills keep a 2015 Lancer ready for the next squall.

Popular questions

What size wiper refills does a 2015 Mitsubishi Lancer use?
Most 2015 Lancer sedans use about 24 inches on the driver’s side and 18 inches on the passenger’s side. Sportback models typically add a small rear wiper (often around 12 inches). It’s smart to measure your existing inserts or check the owner’s manual to confirm, as trims and aftermarket blades can vary.

Can they replace just the refills instead of the whole blade on a 2015 Lancer?
Yes. If the car has the original-style framed blades, refills slide straight in, as covered in Mitsubishi’s service procedures. If someone has already upgraded to one-piece beam blades that don’t accept inserts, replace the entire blade instead.

How often should wiper refills be changed in Australia or New Zealand?
Every 6–12 months is a good rule of thumb, depending on sun, heat, salt and dust exposure. If there are streaks, squeaks, or splits, change them sooner. Regularly cleaning the rubber and windscreen will stretch the interval.