Your Selected Vehicle
Parts for your 2014 Audi Q5-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2014 Audi Q5 interior bulbs — purpose, replacement and maintenance
Interior bulbs are absolutely used on the 2014 Audi Q5. Audi’s 2014 Q5 Owner’s Manual and service literature (ElsaWin) list multiple interior light points, and the Audi parts catalogue (ETKA) specifies the corresponding bulbs and LED modules. Depending on trim, the Q5 left the factory with a mix of replaceable halogen bulbs and, on some packages, integrated LED units for selected positions.
These lights exist for comfort and safety, helping with visibility in the cabin at night and making sure nothing gets left behind. Typical locations include:
- Front/rear dome and reading lamps
- Footwell and door courtesy/puddle lights
- Glovebox and centre console
- Sun visor vanity mirrors
- Boot/cargo area
Most 2014 Q5s use 12 V bulbs such as W5W/T10 wedge and C5W festoon (commonly 36–42 mm) for many positions. Vehicles with the interior LED light package may have factory LED modules in some or all positions, these still serve the same purpose but may be non-serviceable as individual bulbs. Always match wattage and fitment to avoid heat damage or CAN-bus errors.
There’s no fixed service interval for cabin bulbs, they’re replaced when they fail, look dim, or flicker. As part of a scheduled service, it’s smart to check all interior lights, clean the lenses, and confirm the boot and glovebox switches operate correctly to prevent battery drain if a light sticks on.
Handy replacement tips for the Q5:
- Switch ignition off and let hot bulbs cool.
- Use a plastic trim tool to release lenses without marking the headlining.
- Note bulb orientation, for LEDs, observe polarity.
- Fit like-for-like wattage or CAN-bus compatible LEDs to avoid warnings.
- Test before fully refitting the lens or housing.
- If a light stays dead, check the relevant fuse and door/boot switches.
Keen on an LED upgrade? Many owners swap halogens for quality, warm-white, CAN-bus friendly LEDs for a crisp look and lower power draw. Stick to reputable brands, avoid overly blue colour temperatures, and don’t exceed the original wattage equivalent to keep heat and glare in check.
Popular questions about 2014 Audi Q5 interior bulbs
What bulb sizes does a 2014 Audi Q5 use inside?
Most trims use W5W (T10) wedge bulbs and C5W festoon (often 36–42 mm) for dome, vanity, and boot lights, while door and footwell lamps can be wedge or LED modules depending on package. Variations exist by build and option codes, so checking the owner’s manual or VIN-specific parts listing is best.
Can the interior lights be upgraded to LED without errors?
Yes, if using CAN-bus compatible LEDs matched to the original fitment. Some Q5s already have factory LEDs in certain positions, for the rest, choose polarity-correct lamps and test before refitting. If a bulb throws a warning or flickers, swap to a higher quality, error-free LED.
Why do my interior lights stay on after closing the doors?
Check the individual lamp switches, the MMI light settings, and make sure all doors and the boot are fully latched. A sticky door/boot switch or a partially closed glovebox can keep a circuit live. If everything appears fine, a quick fault scan can point to a switch or module issue.
