Your Selected Vehicle
Filter
Filter By
Parts for your 2012 Honda Accord-Headlights
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 10m Blister Pack (NZ Ref. 157) - ACX0811-10BL
OEX 2.5mm 5 Core Trailer Cable, With Black Sheath - 10m Blister Pack (NZ Ref.205) - ACX0820-10BL
OEX 3mm Twin Core Automotive Cable, Red / Black, With Black Sheath - 5m Blister Pack (NZ Ref.151) - ACX0806-5BL
Explore 4WD & Adventure
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
OEX 2mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 50m Roll (NZ Ref. 147) - ACX0799
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 10m Blister Pack (NZ Ref.153) - ACX0808-10BL
OEX 3mm Twin Core Automotive Cable, Red / Black, With Black Sheath - 10m Blister Pack (NZ Ref.151) - ACX0806-10BL
OEX 8 B&S Twin Core Battery Cable, Red / Black With Black Sheath - 5m Blister Pack - ACX0927-5BL
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref.153) - ACX0808
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref. 157) - ACX0811-5BL
OEX 3mm Twin Core Automotive Cable, Figure 8, Red With Black Trace - 4m Roll (NZ Ref.151) - ACX0802-4M
2012 Honda Accord headlights: what they do, and how to look after them
Headlights are absolutely fitted to the 2012 Honda Accord. Honda’s owner’s/service manuals for this model include lamp specifications and replacement steps, and Australian/New Zealand road rules (ADR lighting requirements and NZTA/WoF checks) require compliant headlamps on road-going vehicles. So yes—headlights are relevant and used on this Accord.
The headlights on a 2012 Honda Accord are there for two big reasons: to light the road ahead after dark and in poor weather, and to make the vehicle more visible to everyone else. Most variants in Australia and New Zealand run halogen bulbs (commonly H11 low beam and 9005/HB3 high beam), while some higher-spec trims in certain markets may use HID/Xenon low beams. Either way, the design focuses light with a precise cutoff so oncoming traffic isn’t dazzled, meeting ADR/ECE beam pattern rules for right‑hand‑drive roads.
As part of regular servicing, it’s smart to check how bright and even the beams are, that both sides match in colour, and that the aim is correct. Halogen bulbs dim gradually over time