Parts for your 2011 Mitsubishi Lancer-Pedal pads

2011 Mitsubishi Lancer Pedal Pads — What They Do and When to Replace Them

Technical references confirm pedal pads are fitted to the 2011 Mitsubishi Lancer (CJ/CF series). The Mitsubishi ASA electronic parts catalogue lists replaceable rubber pads for the brake pedal on both automatic and manual models, and a clutch pedal pad for manual variants. The 2011 Lancer Service Manual (Chassis sections covering brake and clutch pedals) also details inspection and replacement of these pedal rubbers. The accelerator pedal is a hinged assembly and does not use a removable rubber pad.

On a 2011 Lancer, pedal pads are the grippy rubber covers fitted over the metal brake and clutch pedal faces. Their job is straightforward but vital: provide consistent traction underfoot, reduce slip in the wet, and cushion vibration for better pedal feel. As the rubber wears smooth or hardens with age, stopping distances can suffer if the driver’s foot slips at the worst possible moment. That’s why these little bits of rubber punch well above their weight in safety.

As part of routine servicing, pedal pads deserve a quick look. A simple check each service interval (around 10,000–15,000 km) helps catch issues early. Tell-tales for replacement include: the surface going shiny or slick, visible cracking, edges curling away from the pedal plate, or the pad feeling loose. On manual Lancers, clutch pad wear can be just as pronounced as the brake, especially with lots of city driving.

Care is easy. Keep road grit and oil off the pads with a mild detergent and a soft brush. Avoid silicone dressings or petroleum-based cleaners that can leave the surface slippery or degrade the rubber. When replacement is due, choose a quality pad matched to transmission type (auto brake pad versus manual brake and clutch pads). The fitment is a quick driveway job: slip the old pad off, warm the new pad slightly to make it more pliable, hook the top lip over the pedal plate, then work the edges on fully so the rubber lip seats all the way around. After installation, confirm the pad is secure and perform a safe pedal feel check. No adjustment is normally required, but it’s sensible to verify brake pedal free play and clutch engagement feel after any pedal work.

Why bother? Fresh pedal pads restore grip, confidence, and compliance underfoot — small parts that make a big difference in everyday driving across Aussie and Kiwi conditions.

• Fitted on this vehicle: Brake pedal pad (auto and manual), clutch pedal pad (manual only)
• Inspection: Every service or if slipping is noticed
• Replace when: Smooth, cracked, hard, or loose

Popular questions about 2011 Mitsubishi Lancer pedal pads

Do all 2011 Lancers have replaceable pedal pads?
Yes. All have a replaceable brake pedal pad. Manual-transmission models also have a replaceable clutch pedal pad. The accelerator pedal is a one-piece assembly without a separate rubber cover.

How long do pedal pads typically last?
It varies with driving style and conditions. Many Lancer owners see 80,000–120,000 km from a brake pedal pad, while clutch pads on manuals can wear sooner with heavy stop–start use. Replace any time the surface is smooth, cracked, or slippery.

Are auto and manual pedal pads the same?
No. Automatic models use a single brake pad shape, while manuals have specific brake and clutch pads. Always match the pad to transmission type and model year for correct fit.