Your Selected Vehicle
Parts for your 2009 Honda Odyssey-Headlights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps 12/24 Multi Volt Stop/Tail Lamp 36 LEDs With 40cm Wire - 80RM
LED Autolamps Twin function side indicator with amber side marker - 97AIMCSB
Explore 4WD & Adventure
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIM
LED Autolamps 12V Round Stop/Tail Lamp With Red Lens Recessed Mount - 102R
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Amber LED Indicator Lamp Insert For J3 Series Blister Pack - J3AM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMB
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
2009 Honda Odyssey Headlights
Headlights are absolutely fitted and relevant on the 2009 Honda Odyssey. Technical references such as the 2009 Honda Odyssey Owner’s Manual and Honda Service Manual specify halogen headlamps, typically using H11 bulbs for low beam and 9005 (HB3) for high beam, with some markets using the high beam as a daytime running lamp. These systems comply with lighting regulations such as ADR 13/00 (AU/NZ) and FMVSS 108 (US/Canada), confirming the Odyssey relies on conventional headlight assemblies for road use.
The headlights on a 2009 Odyssey do the heavy lifting after dark and in foul weather—helping the driver see clearly while making the vehicle more visible to others. Beyond safety and comfort, they’re a legal must. Keeping them bright, clean, and correctly aimed makes a noticeable difference on country roads and city commutes alike.
For day-to-day care, it’s smart to inspect the lenses and operation every 10,000 km or six months. Clean the lenses with a gentle car wash solution, not harsh solvents. If the plastic looks yellowed or hazy, a quality restoration kit can bring back clarity. Replace failing bulbs in pairs to keep brightness and colour even, and avoid touching the glass with bare fingers—use gloves or a clean tissue.
- Replacement basics: open the bonnet, locate the rear dust cap of the headlamp, disconnect the connector, twist out the old bulb, fit the correct H11 (low) or 9005/HB3 (high), and reinstall the cap. Test both beams before closing up.
- Aim check: park on level ground facing a wall, set the load as normal, and adjust using the vertical adjuster so the cut-off sits just below head height at a few metres. If unsure, let a workshop set the aim to ADR specs.
- Electrical checks: if both sides are out, look at the relevant fuse or relay first, moisture inside the housing points to a faulty seal that should be fixed promptly.
Thinking of upgrades? Quality halogen +130% bulbs are an easy, legal lift. LED or HID retrofits in halogen housings often aren’t road-legal in AU/NZ unless the entire lamp assembly is certified—best to stick with ADR-compliant options or consult an authorised technician.
Popular questions about 2009 Honda Odyssey headlights
What headlight bulb size does a 2009 Honda Odyssey use?
Most 2009 Odysseys use H11 for low beam and 9005 (HB3) for high beam. Some market variants differ, so it’s wise to confirm against the Owner’s Manual or the markings on the lamp housing. Parking/position and indicator bulbs are separate types.
How do you adjust the headlight aim on a 2009 Odyssey?
Park on level ground about 3–7 metres from a wall, with normal fuel and load. Mark the headlamp centre height on the wall, then use the vertical adjuster on each lamp to set the cut-off slightly below that line. Proper aim prevents glare and improves down-road visibility, a workshop can set it precisely to ADR guidelines.
Are LED or HID headlight upgrades legal for this model?
In Australia and New Zealand, swapping halogen bulbs for LED/HID inserts in standard reflector housings is often not road-legal unless the entire assembly is certified to the relevant ADR/ECE standard. If brighter light is the goal, choose premium halogen bulbs or seek an ADR-compliant headlamp assembly and have it fitted professionally.