Your Selected Vehicle
Parts for your 2009 Honda Odyssey-Headlights
LED Autolamps Multi Volt Stop/Tail Lamp With Rubber Grommet And Plug - 164RM
LED Autolamps 12/24V Reverse Lamp Horizontal/Vertical Mount Twin Blister - 11WM-2
LED Autolamps 12/24V Cat6 Side Direction Indicator Clear Lens Blister Pack - 77ACM
LED Autolamps 12/24V Front End Outline Marker Recessed Fitting Twin Blister - 7922WM2
Explore 4WD & Adventure
LED Autolamps 24V Front Indicator And Park Light Chrome Bezel Blister Pack - 285CAW24
LED Autolamps 12V Stop/Tail/Indicator/Licence Plate Lamp With Reflector - 149BARL4P
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12V Stop/Tail Lamp Black Chrome Round With Clear Lens - 102RBC
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
2009 Honda Odyssey Headlights
Headlights are absolutely fitted and relevant on the 2009 Honda Odyssey. Technical references such as the 2009 Honda Odyssey Owner’s Manual and Honda Service Manual specify halogen headlamps, typically using H11 bulbs for low beam and 9005 (HB3) for high beam, with some markets using the high beam as a daytime running lamp. These systems comply with lighting regulations such as ADR 13/00 (AU/NZ) and FMVSS 108 (US/Canada), confirming the Odyssey relies on conventional headlight assemblies for road use.
The headlights on a 2009 Odyssey do the heavy lifting after dark and in foul weather—helping the driver see clearly while making the vehicle more visible to others. Beyond safety and comfort, they’re a legal must. Keeping them bright, clean, and correctly aimed makes a noticeable difference on country roads and city commutes alike.
For day-to-day care, it’s smart to inspect the lenses and operation every 10,000 km or six months. Clean the lenses with a gentle car wash solution, not harsh solvents. If the plastic looks yellowed or hazy, a quality restoration kit can bring back clarity. Replace failing bulbs in pairs to keep brightness and colour even, and avoid touching the glass with bare fingers—use gloves or a clean tissue.
- Replacement basics: open the bonnet, locate the rear dust cap of the headlamp, disconnect the connector, twist out the old bulb, fit the correct H11 (low) or 9005/HB3 (high), and reinstall the cap. Test both beams before closing up.
- Aim check: park on level ground facing a wall, set the load as normal, and adjust using the vertical adjuster so the cut-off sits just below head height at a few metres. If unsure, let a workshop set the aim to ADR specs.
- Electrical checks: if both sides are out, look at the relevant fuse or relay first, moisture inside the housing points to a faulty seal that should be fixed promptly.
Thinking of upgrades? Quality halogen +130% bulbs are an easy, legal lift. LED or HID retrofits in halogen housings often aren’t road-legal in AU/NZ unless the entire lamp assembly is certified—best to stick with ADR-compliant options or consult an authorised technician.
Popular questions about 2009 Honda Odyssey headlights
What headlight bulb size does a 2009 Honda Odyssey use?
Most 2009 Odysseys use H11 for low beam and 9005 (HB3) for high beam. Some market variants differ, so it’s wise to confirm against the Owner’s Manual or the markings on the lamp housing. Parking/position and indicator bulbs are separate types.
How do you adjust the headlight aim on a 2009 Odyssey?
Park on level ground about 3–7 metres from a wall, with normal fuel and load. Mark the headlamp centre height on the wall, then use the vertical adjuster on each lamp to set the cut-off slightly below that line. Proper aim prevents glare and improves down-road visibility, a workshop can set it precisely to ADR guidelines.
Are LED or HID headlight upgrades legal for this model?
In Australia and New Zealand, swapping halogen bulbs for LED/HID inserts in standard reflector housings is often not road-legal unless the entire assembly is certified to the relevant ADR/ECE standard. If brighter light is the goal, choose premium halogen bulbs or seek an ADR-compliant headlamp assembly and have it fitted professionally.