Parts for your 2007 Nissan Maxima-Pedal pads

2007 Nissan Maxima pedal pads — purpose, checks, and easy replacement

Pedal pads are relevant on the 2007 Nissan Maxima. The 2007 Maxima is equipped with a removable rubber brake pedal pad, as shown in the Nissan Factory Service Manual (Brake/Brake Control – Brake Pedal) and the Nissan electronic parts catalogue (FAST, group 465). The accelerator pedal has a moulded plastic face that isn’t a service item, and there’s no clutch pedal pad because this model was delivered with an automatic transmission in most markets.

On this Maxima, the brake pedal pad is there for one key reason: grip. That grippy rubber surface keeps the driver’s shoe from sliding—especially in the wet—helping maintain confident, consistent braking. It also protects the metal pedal plate underneath from wear and reduces noise and vibration felt through the foot. Keeping the pad in good nick aligns with the intent of safety standards that call for non-slip pedal surfaces.

During regular servicing, it’s smart to inspect the brake pedal pad. Over time, rubber hardens, polishes smooth, or cracks. If the surface has gone shiny, feels slippery when damp, is torn, or has worn thin corners, it’s due for replacement. Oil or silicone contamination is another reason to bin it—cleaning won’t reliably restore grip.

• What to watch for: smooth or glossy areas, cracks, hardness, or edges curling away.
• Care tips: clean occasionally with mild soap and water, avoid petroleum cleaners or silicone dressings that can make it slick.

Replacement is quick and inexpensive—usually a few minutes. Gently lever the old pad off the metal pedal plate, then press the new pad on, working the lip evenly around the plate. If it’s cold, warming the pad slightly helps it seat. After fitting, press the brake a few times with clean, dry footwear to confirm it’s secure and feels grippy. Choosing a genuine or quality aftermarket pad that matches the Maxima’s pedal plate profile is important, universal covers that seem “close enough” can shift or reduce clearance and aren’t worth the hassle.

As a rule of thumb, have the pad checked at every service or 10,000–15,000 kilometres, and replace at the first sign of compromised traction. It’s a small, low-cost part that makes a big difference to pedal feel and safety.

• Signs it’s time to replace: slipping underfoot, visible cracks, or the pad no longer sitting snugly on the pedal.
• Avoid: thick decorative covers that can snag floor mats or reduce pedal feel.

Popular questions about 2007 Nissan Maxima pedal pads

Are pedal pads used on a 2007 Nissan Maxima?
Yes. This model uses a removable rubber brake pedal pad. The accelerator has a moulded plastic face, and there’s no clutch pad because the 2007 Maxima is automatic in most markets.

How often should the brake pedal pad be replaced?
There’s no fixed interval—replace it when it’s worn smooth, cracked, hardened, or contaminated with oil/silicone. A quick check at each service or every 10,000–15,000 km is a good practice.

Can a universal pedal cover be used?
It’s best to use a pad designed for the Maxima’s pedal plate. Universal covers can fit poorly, shift underfoot, or affect clearance. A correct-fit genuine or quality aftermarket pad keeps grip and safety where they should be.