Skip to content Skip to navigation menu

Your Selected Vehicle

Parts for your 2007 Honda Elysion-Wiper refills

Sort by
Showing 1 - 4 of 4 products

2007 Honda Elysion wiper-refills: what they do and when to replace them

Based on Honda’s technical literature for the Elysion RR1–RR4 series (2004–2013) and the Honda Electronic Parts Catalogue, the 2007 Honda Elysion uses replaceable wiper refills. Honda lists the rubber insert (often labelled “wiper rubber” for front and rear) as a service part and outlines replacement in the Wipers/Washers section of the service manual. So yes—wiper-refills are absolutely relevant for this model.

On this people mover, the wiper-refill is the rubber insert that slides into the original Honda blade frame. Keeping the OEM blade body and just swapping the rubber is a smart, tidy way to maintain clear vision without binning a perfectly good frame. It’s also typically quicker and cheaper, and it keeps the factory wipe pattern the Elysion’s big windscreen was designed for.

In Aussie and Kiwi conditions—UV, heat, sea air and road grime—rubber hardens quicker. They’ll usually want changing every 6–12 months, or sooner if the screen starts streaking. Common tell-tales:

  • Streaks, chatter or missed patches across the arc
  • Split or feathered rubber edge
  • Squeaks even on a wet screen

During a service, it pays to clean the screen and blade rails, then run a finger along the rubber to feel for nicks. A wipe with mild washer fluid or diluted isopropyl helps. When fitting new refills, match profile and length to the VIN or Honda’s spec, the Elysion uses different lengths left/right and a specific rear style. If the vehicle has had aftermarket aero/beam blades fitted, note some of those don’t accept refills—those assemblies may need full blade replacements instead.

Owners can choose natural rubber (great initial wipe, softer feel) or silicone-infused refills (often last longer and bead water nicely). Either way, keeping the windscreen clean and avoiding dry wiping will stretch the life. Don’t fold the arm back onto the glass during fitting—support it gently—and make sure the insert locks fully into the blade rails so it won’t creep out at speed.

Bottom line: for a 2007 Honda Elysion, fresh refills are a simple, factory-approved way to restore quiet, streak-free wiping and safer wet-weather driving, without replacing the whole blade assembly.

Popular questions

What size wiper refills does a 2007 Honda Elysion use?
Sizes vary by side and the rear uses a different profile. Because Honda supplied multiple profiles over the RR1–RR4 range, the safest bet is to match by VIN or compare the old insert’s length and locking profile. A parts counter using the Honda EPC can confirm the exact front-left, front-right and rear refill.

Can the rubber be replaced without changing the whole blade?
Yes. The factory Elysion blade frames are designed to accept replacement inserts. Slide out the old rubber (and metal backing strips where fitted), transfer the strips to the new insert, then slide in and lock. If the car has aftermarket beam blades that don’t accept refills, replace the complete blade instead.

How often should Elysion wiper refills be replaced in Australia or New Zealand?
Plan on 6–12 months depending on exposure to sun, salt and dust. If the car lives outdoors or does coastal kilometres, expect the shorter end of that range. Replace sooner if there’s streaking, chatter or fraying edges, and keep the glass clean to prolong life.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What size wiper refills does a 2007 Honda Elysion use?", "acceptedAnswer": { "@type": "Answer", "text": "Sizes vary by side and the rear uses a different profile. Because Honda supplied multiple profiles over the RR1–RR4 range, the safest bet is to match by VIN or compare the old insert’s length and locking profile. A parts counter using the Honda EPC can confirm the exact front-left, front-right and rear refill." } }, { "@type": "Question", "name": "Can the rubber be replaced without changing the whole blade?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. The factory Elysion blade frames are designed to accept replacement inserts. Slide out the old rubber (and metal backing strips where fitted), transfer the strips to the new insert, then slide in and lock. If the car has aftermarket beam blades that don’t accept refills, replace the complete blade instead." } }, { "@type": "Question", "name": "How often should Elysion wiper refills be replaced in Australia or New Zealand?", "acceptedAnswer": { "@type": "Answer", "text": "Plan on 6–12 months depending on exposure to sun, salt and dust. If the car lives outdoors or does coastal kilometres, expect the shorter end of that range. Replace sooner if there’s streaking, chatter or fraying edges, and keep the glass clean to prolong life." } } ]}