Parts for your 2006 Honda Cr-v-Coil springs

2006 Honda CR‑V coil springs — purpose, care, and when to replace

Coil springs are absolutely used on the 2006 Honda CR‑V. Technical sources confirm this: the Honda CR‑V 2002–2006 Factory Service Manual specifies MacPherson struts with coil springs up front and a double‑wishbone rear with separate coil springs, Honda’s Electronic Parts Catalogue lists both front and rear coil springs for 2006 models, and third‑party manuals (e.g., Haynes Repair Manual for Honda CR‑V 2002–2012) and period road tests also describe this suspension layout.

On this CR‑V, the coil springs carry the vehicle’s weight, set ride height, and let the shocks control movement. They keep tyres planted over bumps, help stability through corners, and protect the rest of the chassis from harsh impacts. When they’re tired or broken, ride height sags, handling feels floaty or crashy, and the car can clunk over bumps.

Good news: coil springs don’t need regular servicing, but they do benefit from routine inspection during scheduled services—especially in coastal or off‑road conditions common around Australia and New Zealand. Look for rust pitting, cracked paint, broken ends, or coils that have started to bind. Measure ride height side‑to‑side, a noticeable lean suggests a weak spring. If the vehicle tows or carries gear often, consider springs rated for the extra load.

When replacement time comes, it’s smart practice to:

• Replace springs in axle pairs (both fronts or both rears) to keep the ride height even and handling predictable.
• Inspect and, if needed, renew related parts: strut top mounts/bearings, upper and lower spring seats/insulators, bump stops, and dust boots.
• Use quality spring compressors and safe workshop technique—stored energy in a compressed spring can be dangerous. If unsure, leave it to a pro.
• Follow factory torque settings and always get a wheel alignment after disturbing struts or rear suspension arms.

Signs it’s time to act include a rear that squats with modest load, nose‑diving under brakes, new clunks after a coil break, or uneven ride height you can spot from a few metres away. Fresh, OE‑spec or carefully chosen aftermarket springs will bring the CR‑V’s stance, comfort, and road manners back to how Honda intended.

Popular questions about 2006 Honda CR‑V coil springs

How long do coil springs last on a 2006 CR‑V?
Many will run well past 150,000–200,000 km, but life depends on load, roads, and corrosion exposure. Coastal areas and rough tracks shorten lifespan. Inspect at each service and any time ride height or comfort changes.

Do front and rear springs need to be replaced in pairs?
Yes—replace in axle pairs. Mixing an old spring with a new one on the same axle can cause uneven ride height and quirky handling, especially under braking or when cornering.

Will a wheel alignment be needed after replacing coil springs?
Absolutely. Changing springs alters ride height and can nudge camber and toe out of spec. A post‑job alignment protects tyres and restores proper steering feel.