Your Selected Vehicle
Parts for your 1999 Suzuki Vitara-Headlights
Narva Low Profile High Powered 3 LED Strobe/Warning Light Amber 12V/24V - 85203A
Fitment Notes:
LED Autolamps 90 Series Amber Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90AM
Fitment Notes:
Explore 4WD & Adventure
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
Fitment Notes:
OEX Mini Relay 12V 5 Pin Change Over 30/40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1938RBL
Fitment Notes:
OEX 3mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1289L
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Stedi Hyper LED Flood Lights 14 Inch 120W 6000K Colour 10800 Lumens - LEDHYPR-14-120W
Fitment Notes:
OEX 2mm Twin Core, Tinned Marine Cable, Red/Black with White Sheath, 100m Roll - ACX0985L
Fitment Notes:
Maintaining and Replacing Headlights on Your 1999 Suzuki Vitara
The headlights on your 1999 Suzuki Vitara are vital for safe driving, especially after dusk or in low visibility conditions. Over time, headlights can dim, become misaligned, or even burn out. Regular maintenance and timely replacement are essential to ensure you have optimal lighting performance when you need it most.
When it comes to replacing the headlights on your Vitara, there are a few straightforward steps you can follow to get the job done. Before you start, make sure to have the right replacement bulbs. Check your Vitara's manual to confirm the specific type required for your vehicle.
- Turn off the Vehicle: Always make sure your vehicle is turned off before you start any maintenance work. Disconnecting the battery is often wise to prevent any electrical short circuits.
- Access the Headlight: Open the bonnet and find the rear of the headlight assembly. In some cases, you may need to remove other components like the air intake duct or battery to gain access.
- Remove the Bulb: Locate the bulb connector, usually attached by either a clip or a twist mechanism. Detach it carefully to avoid damage. Handle the bulb gently to prevent it from breaking.
- Install the New Bulb: Take the new bulb, making sure not to touch the glass with your bare hands, and fit it securely into place. Finger oil can cause the bulb to prematurely burn out, so it's a good idea to wear gloves.
- Reconnect: Reattach the connector and any other parts you had to move or remove. Make sure everything is secure before moving on.
- Test the New Bulb: Turn on your vehicle and test the new headlight to ensure it's functioning properly. Check both the low-beam and high-beam settings.
Once your new headlights are installed, it's wise to occasionally check their alignment to ensure they are illuminating the road properly. Misaligned headlights can either blind oncoming traffic or reduce your visibility. If you're unsure how to adjust them yourself, it's best to consult with a professional mechanic.
To prolong the life of your headlights, make it a habit to clean them regularly. Dust, dirt, and oxidation can all cloud the headlight lens, reducing lighting performance. Use a damp cloth or a specialised headlight cleaner. For persistent cloudiness, a headlight restoration kit might be necessary.
Incorporating headlight checks into your routine vehicle maintenance schedule is a simple yet effective way to ensure safety and reliability. If you notice persistent issues or have concerns about the performance of your headlights, don't hesitate to seek professional advice.