Your Selected Vehicle
Parts for your 1998 Daihatsu Gran move-Headlight bulbs
OEX 4mm Twin Core Tinned Marine Cable, Red/Black With White Sheath - 100m Roll (NZ Ref. 153M) - ACX0966L
Fitment Notes:
Explore 4WD & Adventure
Narva 12/24 Aeromax Amber LED Mini Light Bar Clear Lens Magnetic Mount - 85013AC
Fitment Notes:
OEX Emergency Stop Switch On - Off /Off - On (Contacts Rated 3A @ 24V) - ACX3438
Fitment Notes:
OEX Type III, Heavy Duty Manual Reset Circuit Breaker, 200A - Single Pack - ACX1848
Fitment Notes:
OEX Type III, Heavy Duty Manual Reset Circuit Breaker, 150A - Single Pack - ACX1847
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
OEX Ignition Switch Acc - Off - Acc/Ign - Start (Contacts Rated 30A @ 12V) - ACX3564
Fitment Notes:
OEX 20A Mini Manual Reset Circuit Breaker, Type 3, Switchable - Single Pack - ACX2082BL
Fitment Notes:
Cole Hersee Rocker Switch Mom On - Off - Mom On - DPDT (Contacts Rated 25A @ 12V) - 58027-11BL
Fitment Notes:
Narva Heavy Duty Toggle Switch Momentary On/Off/Momentary On DPDT (Contacts Rated 25A @ 12V) - 60068BL
Fitment Notes:
LED Autolamps 9/30V LED Red Amber Side Marker Light Clear Lens 30cm Wire - 35ARMB
Fitment Notes:
Maintaining and Replacing Headlight Bulbs on Your 1998 Daihatsu Gran Move
Headlight bulbs are essential components for safe driving, ensuring you have a clear view of the road at night and in poor weather conditions. It's easy to overlook the importance of these small components, but as part of servicing your 1998 Daihatsu Gran Move, it pays to be attentive to their functioning. If your headlights are dimmer than usual or if one has stopped working altogether, it might be time to replace the bulbs.
Replacing headlight bulbs in the Daihatsu Gran Move isn't too challenging. If you're feeling handy, you can do it yourself rather than heading to a mechanic. This not only saves on costs but also gives you the satisfaction of maintaining your vehicle personally. Here's a simple guide to follow:
- Start by switching off your vehicle and ensuring the headlights are off to prevent any electrical issues or burns while working.
- Open the bonnet of your car and locate the back of the headlight assembly. The Gran Move is relatively straightforward in this regard, with easily accessible assemblies.
- Remove the protective dust cover from the rear of the headlight assembly, usually by twisting it off. This will help you reach the bulb socket.
- Release the clip or pin that holds the bulb socket in place. Be gentle to avoid breaking these seemingly minor yet crucial parts.
- Carefully pull the socket out and remove the old bulb. Handle the replacement bulb with care, preferably using gloves or a cloth, as oils from your fingers can reduce its lifespan.
- Insert the new bulb into the socket, ensuring it's secured properly. Try not to force it as this might break the bulb or socket.
- Reattach the clip or pin, replace the dust cover, and close the bonnet. Test your new headlight bulbs by turning on your headlights to ensure they're working correctly.
When carrying out this relatively simple maintenance task, remember that using high-quality bulbs is recommended. These not only last longer but also tend to provide better illumination, enhancing your safety on the road. Quality bulbs ensure that your lights are bright and produce a better pattern of illumination, reducing glare for oncoming drivers.
While headlight bulbs are not the most expensive part of your car, their role in ensuring your visibility can't be underestimated. Regular checks and replacement as needed is the smart move for any vehicle owner. If you're unsure about handling this yourself, you can always consult your car's manual or seek assistance from a professional mechanic.