Your Selected Vehicle
Parts for your 1987 Suzuki Swift-Headlight bulbs
Narva 9–33 Volt LED Light Guide Side Marker Lamp (Amber) With Chrome Cover - 92406
Fitment Notes:
Narva Crimp Terminal Ring Brass Terminal Entry 8.4mm Non Insulated 100 Pce - 56240
Fitment Notes:
Explore 4WD & Adventure
Cole Hersee Toggle Switch Mom On - Off - Mom On - SPDT (Contacts Rated 25A @ 12V) - 55021BL
Fitment Notes:
OEX 2 B&S Battery Lead, Post to Stud, Length - 1,370mm, Stud Hole - 10mm - ACX1016
Fitment Notes:
Narva Crimp Terminal Ring Blue Terminal Entry 8.4mm Heat Shrinkable 50 Pce - 56368
Fitment Notes:
Narva Heavy Duty Rocker Switch Off/Momentary On SPST (Contacts Rated 20A @ 12V) - 63050BL
Fitment Notes:
Cole Hersee Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 25A @ 12V) - 58328-11BL
Fitment Notes:
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
Fitment Notes:
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
Fitment Notes:
OEX 39mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Red 1.2M - ACX1297RL
Fitment Notes:
Headlight Bulb Replacement and Maintenance for the 1987 Suzuki Swift
When it comes to the 1987 Suzuki Swift, keeping your headlight bulbs in top-notch condition is crucial for maintaining optimal visibility and safety on the road. While the specifics of headlight bulb type for this vehicle can vary slightly, it generally uses a standard halogen bulb. For longevity and performance, it's important to regularly check and maintain these bulbs. Here's a simple guide on how to go about it.
Maintaining your headlight bulbs is relatively straightforward but requires a diligent approach. Start with regular inspections. Every so often, take a few minutes to do a walkaround of your car and test the headlights. Look out for any flickering, dimness, or complete failure, which could indicate the bulbs are on their way out. Addressing these issues promptly is essential as driving with faulty headlights can significantly reduce night-time visibility and may result in fines or penalties if caught.
If you find that a bulb needs replacing, the process is generally uncomplicated. Here's what you need to do:
- Turn off your engine and ensure the lights are switched off. For safety reasons, it's best to disconnect the battery.
- Access the bulb by opening the bonnet. Look for the back of the headlight assembly where you'll find the bulb holder.
- Carefully disconnect the wiring harness from the bulb holder. Be gentle to avoid damaging the connectors.
- Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
- Insert the new bulb by aligning it properly within the socket, then twist it clockwise to secure it in place.
- Reconnect the wiring harness, ensuring a snug fit to avoid connectivity issues.
- Test your new headlight bulb by turning on the engine and ensuring the beam is correctly aligned and functioning as expected.
If alignment is off, you may need to adjust the headlight housing slightly. Misalignment can cause poor visibility and may dazzle other drivers, so ensure the beam is directed correctly.
It's wise to replace both headlights simultaneously even if only one has failed. This ensures even illumination and prevents you from having to go through the process again shortly thereafter. Keep a spare set of bulbs in your vehicle, just in case one fails unexpectedly.
Using quality bulbs is key, they tend to last longer and offer better illumination. While it might be tempting to opt for the cheaper options, investing in a good set will pay off in the long run.
A little regular maintenance and attention to your headlights can ensure you enjoy safe and stress-free driving in your 1987 Suzuki Swift. Happy driving!