Your Selected Vehicle
Parts for your 1987 Suzuki Swift-Headlight bulbs
Explore 4WD & Adventure
Narva 4 Position Ignition Switch Suits International Trucks (Contacts Rated 5A @ 12V) - 64026
Fitment Notes:
Narva Sealed Rocker Switch On/Off/On DPDT 12/24V Blue LED (Contacts Rated 20A @ 12V) - 63169BL
Fitment Notes:
Narva Sealed Rocker Switch Off/On/On DPDT Red LED (Contacts Rated 20A @ 12V) - 63170BL
Fitment Notes:
Narva Sealed Rocker Switch Off/Momentary On SPST 12/24V Red LED (Contacts Rated 20A @ 12V) - 63164BL
Fitment Notes:
OEX 2.5mm Single Core Automotive Cable, White - 100m Roll (NZ Ref.148) - ACX0695L
Fitment Notes:
Narva Crimp Terminal Male Blade Yellow Terminal Entry 6.3 x 0.8mm Heat Shrinkable 50Pk - 56324
Fitment Notes:
Narva Sealed Rocker Switch Off/On/On DPDT 12/24V Blue LED (Contacts Rated 20A @ 12V) - 63171BL
Fitment Notes:
OEX Toggle Switch Mom On - Off - Mom On - DPDT (Contacts Rated 20A) IP68 - ACX7636
Fitment Notes:
Narva Push Button Switch Off/On SPST Red LED (Contacts Rated 10A @ 15V) - 60076BL
Fitment Notes:
Headlight Bulb Replacement and Maintenance for the 1987 Suzuki Swift
When it comes to the 1987 Suzuki Swift, keeping your headlight bulbs in top-notch condition is crucial for maintaining optimal visibility and safety on the road. While the specifics of headlight bulb type for this vehicle can vary slightly, it generally uses a standard halogen bulb. For longevity and performance, it's important to regularly check and maintain these bulbs. Here's a simple guide on how to go about it.
Maintaining your headlight bulbs is relatively straightforward but requires a diligent approach. Start with regular inspections. Every so often, take a few minutes to do a walkaround of your car and test the headlights. Look out for any flickering, dimness, or complete failure, which could indicate the bulbs are on their way out. Addressing these issues promptly is essential as driving with faulty headlights can significantly reduce night-time visibility and may result in fines or penalties if caught.
If you find that a bulb needs replacing, the process is generally uncomplicated. Here's what you need to do:
- Turn off your engine and ensure the lights are switched off. For safety reasons, it's best to disconnect the battery.
- Access the bulb by opening the bonnet. Look for the back of the headlight assembly where you'll find the bulb holder.
- Carefully disconnect the wiring harness from the bulb holder. Be gentle to avoid damaging the connectors.
- Remove the old bulb by twisting it counterclockwise and pulling it out of the socket.
- Insert the new bulb by aligning it properly within the socket, then twist it clockwise to secure it in place.
- Reconnect the wiring harness, ensuring a snug fit to avoid connectivity issues.
- Test your new headlight bulb by turning on the engine and ensuring the beam is correctly aligned and functioning as expected.
If alignment is off, you may need to adjust the headlight housing slightly. Misalignment can cause poor visibility and may dazzle other drivers, so ensure the beam is directed correctly.
It's wise to replace both headlights simultaneously even if only one has failed. This ensures even illumination and prevents you from having to go through the process again shortly thereafter. Keep a spare set of bulbs in your vehicle, just in case one fails unexpectedly.
Using quality bulbs is key, they tend to last longer and offer better illumination. While it might be tempting to opt for the cheaper options, investing in a good set will pay off in the long run.
A little regular maintenance and attention to your headlights can ensure you enjoy safe and stress-free driving in your 1987 Suzuki Swift. Happy driving!