Tridon Sump Plug - TDP003

Tridon Sump/Drain Plug

Sump plugs are a bolt located in the base of an engine sump which is designed to seal and retain oil in modern sump applications. This allows oil to be drained from your engine for servicing. Tridon Sump Plugs are manufactured from either a high quality polymer or carbon steel and are available in many sizes and styles. To ensure the quality of a vehicle service, it is always best practice to inspect and if necessary replace the sump plug during vehicle engine service. The Sump plug must be compatible with the vehicle engine, always refer to the vehicle application list to ensure correct part number selection.

Gone are the days of carburettors and points ignition, when it comes to running modern cars pretty much everything is electronically calculated, adjusted, transmitted and actuated by your ECU (Engine Control Unit) or ECM (Engine Control Module). Whilst the ECU is able to do all the clever calculations and literally operate your car, it relies on a myriad of switches and sensors to transmit all of the necessary information it requires in order to allow the ECU to do its job including oil pressure, fuel pressure, coolant temperature, A/C pressure, power steering pressure and even fuel temperature. Behaving as your car's nervous system, faults in automotive switches or sensors can cause issues such as a lack of power, poor efficiency, overheating, internal engine damage or a car that won’t run, start or idle at all. Whilst your switches and sensors will take care of engine vitals such as oil pressure indication, coolant temperature and oil temperature, various switches and sensors also allow the operation of some of the extra features you wouldn't want to be without including air conditioning systems, electric windows and even interior lights.

Subjected to harsh under-bonnet conditions and tough road use, just like other components of your car, old switches and sensors can fail over time and give incorrect data or no data at all to the ECU. Often these issues will flag up a check engine light on the car which is useful if you have a code reader, however sometimes the issue will remain a mystery. We recommend testing your suspect sensors with a multi-meter to track down the issue. By testing for continuity, voltage and resistance, you can confirm the issue and get stuck into fitting a replacement switch. By fitting quality replacement switches and sensors to your car, you can drive with the confidence that your car will run to its maximum potential in terms of power, efficiency and longevity and that all of your car's features will continue to operate correctly for time to come. If you're replacing a switch or sensor, shop our whole range on the Repco website or visit your nearest Repco store and speak with one of our team.