Parts for your 2025 Mitsubishi Eclipse cross-Pedal pads

2025 Mitsubishi Eclipse Cross Pedal Pads

Pedal pads are relevant and fitted on the 2025 Mitsubishi Eclipse Cross. Technical references including the Mitsubishi Motors Owner’s Manual (Eclipse Cross, 2024/2025 editions), the Mitsubishi ASA electronic parts catalogue for GK/GL-series Eclipse Cross, and the Chassis/Brake sections of the workshop manual all indicate a serviceable rubber brake pedal pad is used. The accelerator uses a moulded tread on the electronic throttle pedal, and AU/NZ models feature an electric parking brake, so there’s no parking-brake pedal. That leaves the brake pedal pad as the key replaceable pad on this vehicle.

On the Eclipse Cross, the brake pedal pad is a grippy rubber cover that sits over the metal pedal. Its job is simple but important: provide traction under wet boots, reduce vibration, and keep pedal feel consistent. Over time, daily driving, dirt, road grime and the odd bit of oil can harden the rubber or wear the tread smooth. When that happens, the risk of a foot slipping off the pedal increases — not ideal in stop–start traffic or on a rainy motorway.

As part of regular servicing, it’s smart to give the brake pedal pad a quick once-over. A technician will usually check it at each service interval, but owners can look for:

• Smoothing or glazing of the tread
• Cracks, splits or hardening of the rubber
• Loose fitment or edges that won’t sit over the pedal plate
• Contamination from oils, silicone dressings or grease

Cleaning is easy: remove loose grit with a brush and wipe with mild soapy water. Avoid silicone or oily dressings — they make the pad slippery. If the pad is worn or won’t clean up, replacement is inexpensive and quick. The usual approach is to warm the new pad in hot (not boiling) water to make it supple, hook the top lip over the pedal, then work it on evenly until the retaining lip seats all the way around. After fitting, press the brake a few times to confirm the pad is secure and the pedal feel is normal.

Sticking with a genuine or OEM-spec pad is recommended for correct fit and compliance. Universal metal “dress-up” covers can interfere with pedal travel or come loose, which can be a safety risk and may cause a WOF/Warrant or roadworthy fail. With a fresh, grippy pad in place, the 2025 Eclipse Cross keeps braking feel consistent — whether cruising across town or heading out on a wet weekend away.

Popular questions

Does the 2025 Mitsubishi Eclipse Cross have removable pedal pads?
Yes — the brake pedal uses a replaceable rubber pad. The accelerator is a moulded plastic electronic pedal without a separate pad, and the vehicle’s electric parking brake means there’s no parking-brake pedal to cover.

How often should the brake pedal pad be replaced?
There’s no fixed kilometre limit. Check it at each service or every 10,000–15,000 km. Replace it if the tread is smooth, cracked, hard, contaminated or if the pad won’t stay seated firmly on the pedal.

Can universal pedal covers be fitted to an Eclipse Cross?
It’s best to use a genuine or OEM-spec brake pedal pad. Universal metal or bolt-on covers can reduce grip, alter pedal height/feel, or come loose — all potential safety issues and possible WOF/roadworthy problems.