Your Selected Vehicle
Parts for your 2024 Toyota Camry-Control arms
Explore 4WD & Adventure
2024 Toyota Camry control arms — purpose, care, and when to replace
Control arms are absolutely used on the 2024 Toyota Camry. Technical references including Toyota’s 2024 Camry specifications and Toyota’s service literature (New Car Features and Repair Manual for the XV70/AXVH7# series) specify a MacPherson strut front suspension with a lower control arm, and a rear multi-link setup that uses multiple control arms to locate the wheel hubs. So, for this model, control arms are a key part of how the suspension steers, supports and aligns the wheels.
On a Camry, the control arms connect the wheel hub/knuckle to the subframe, allowing the wheel to move up and down while keeping geometry stable. Bushes absorb vibration and keep things quiet, while the ball joint at the front lower arm allows steering movement. Healthy arms and bushes keep tyre wear even, braking stable, and the steering nice and predictable on Aussie and Kiwi roads.
As part of routine servicing (typically every 12 months or 15,000 km), it’s smart to have the control arm bushes and ball joints checked for:
- Cracked or torn rubber bushes, excessive play, or leaking ball joint grease
- Clunks over bumps, vague steering, or the car pulling under braking
- Uneven or rapid tyre wear, especially on the inner or outer edges
If wear is found, replacement options include pressing in new bushes or fitting a complete arm assembly (often supplied with bushes and ball joint pre-installed). Many workshops favour complete arms for reliability and time savings. Replacing them in pairs left/right helps keep handling balanced. After any arm or bush work, a proper four-wheel alignment is essential to set camber and toe back to spec.
For drivers tackling corrugations, speed humps, or the odd pothole, consider earlier inspection around 80,000–120,000 km. City commuters might see longer life, but any knock, shimmy, or tyre wear change is a cue to book a check. Genuine Toyota parts or reputable aftermarket arms both work well, the key is quality bushes, correctly torqued fasteners at normal ride height, and an alignment straight after.
Look after the control arms and the Camry rewards with quiet ride quality, crisp turn-in, and tyres that last the distance.
Popular questions about 2024 Toyota Camry control arms
How long do control arm bushes typically last on a 2024 Camry?
In normal Aussie and Kiwi driving, many see 80,000–150,000 km, but life varies with road conditions and driving style. Lots of speed humps, heavy loads, or rough rural roads can shorten that window. Regular inspections at each service help catch wear before it chews out tyres or affects braking stability.
Can just the bushes or ball joint be replaced, or do I need the whole arm?
On this generation Camry, the bushes and lower ball joint may be serviceable separately depending on variant and parts supplier. However, many workshops prefer fitting a complete lower control arm assembly because it often includes new bushes and a ball joint, saves labour time, and restores factory feel in one go.
Do I need a wheel alignment after control arm work?
Yes—every time. Any change to arms, bushes, or ball joints can alter camber and toe. A professional four-wheel alignment right after the job protects tyres, sharpens steering, and ensures the Camry tracks straight and true.
