Parts for your 2024 Toyota Camry-Coil springs

2024 Toyota Camry coil-springs — what they do and when to replace them

Yes, coil-springs are absolutely used on the 2024 Toyota Camry. Toyota’s own technical info and model specifications indicate a MacPherson strut front suspension and a multi-link/double-wishbone style rear, both using coil-springs. This layout appears across Toyota Australia’s 2024 Camry spec sheets and the Toyota Repair Manual for the XV70-series platform, so coil-springs are directly relevant to this model.

On the Camry, coil-springs carry the vehicle’s weight, set its ride height, and work with the struts/shocks to keep the tyres in contact with the road. They soak up bumps, control body movement, and help the car stay composed during cornering and braking. Good springs mean better comfort, grip, and stability, whether it’s the weekday commute or a long-country run.

While coil-springs don’t have a strict service interval, they do fatigue over time, especially on rough roads or with heavy loads. During routine servicing, it’s smart to inspect for corrosion, cracked paint, sagging ride height, or even a fractured coil. If the Camry rides lower on one side, bottoms out, feels floaty, or chews out tyres unevenly, the springs deserve a closer look alongside the dampers.

• Replace in axle pairs: changing just one spring can cause uneven handling and braking.
• Check related parts: top mounts, bearings, insulators, bump stops and dust boots should be inspected and replaced if tired.
• Use quality, correct-rate springs: stick with OEM-equivalent or a well-matched upgrade that suits the Camry’s TNGA-K chassis and intended ride height.
• Get a wheel alignment after any suspension work to protect tyres and restore proper steering feel.
• Torque suspension fasteners at normal ride height to avoid bush preload and squeaks.

Coil-springs are under serious tension. Removal and refit should be done with the right spring compressor and safety gear—ideally by a qualified technician. For New Zealand drivers, a Warrant of Fitness (WoF) check may flag a broken or sagged spring, Aussie drivers may notice scraping over speed humps or a nose-down stance under brakes. Sort it early and the Camry will reward with a quiet, planted, and comfortable ride.

Popular questions about 2024 Toyota Camry coil-springs

How long do the coil-springs typically last?
Most Camry coil-springs last well over 150,000 km, but lifespan depends on road conditions, loads, and climate. Coastal areas or regions with road salt can speed up corrosion. If the car still sits level, rides smoothly, and shows even tyre wear, the springs are likely fine, but routine inspections are wise.

What are the signs a coil-spring has failed?
Look for a noticeable drop on one corner, uneven tyre wear, clunks over bumps, or a harsher ride. Sometimes the bottom coil breaks and is hard to spot without lifting the car—rust flakes or a loose coil fragment in the spring seat can give it away.

Can just one coil-spring be replaced?
It’s best practice to replace springs in pairs on the same axle to keep handling balanced and braking stable. Mixing an old, settled spring with a fresh one can cause the Camry to sit unevenly and feel odd in corners or under heavy braking.