Your Selected Vehicle
Parts for your 2024 Suzuki Splash-Suspension bushes
Explore 4WD & Adventure
2024 Suzuki Splash suspension bushes – relevance and fitment
There isn’t a 2024 Suzuki Splash in global model line-ups. Suzuki discontinued the Splash (sold in some markets as the Maruti Ritz) years earlier, with production ending around 2014. Because that nameplate wasn’t built for 2024, a “2024 Suzuki Splash suspension-bushes” listing isn’t relevant to an actual vehicle on the road.
From a technical standpoint, the Splash platform uses conventional suspension bushes. Factory workshop manuals and OEM parts catalogues for the 2008–2014 Splash specify front lower control arm bushes, anti-roll bar (stabiliser) bushes, and rear torsion-beam/trailing arm bushes. That’s standard practice for compact hatchbacks using MacPherson struts up front and a torsion-beam rear axle, so bushes absolutely exist on real Splash models—just not on a non-existent 2024 variant.
If someone’s searching under “2024”, they likely own an earlier Splash. To get the right parts, match by VIN, build date, and engine/trim. Quality replacement bushes (OE rubber or reputable polyurethane) can restore tight steering feel and consistent tyre wear on 2008–2014 cars. Typical signs that a Splash’s bushes are due include vague steering, clunks over bumps, instability under braking, and uneven tyre wear. A technician will usually check them at each service interval (or around every 15,000 km), looking for cracked rubber, torn sleeves, or excessive movement.
When replacing, it’s best practice to:
- Replace bushes in axle pairs to keep handling balanced.
- Torque fixings at normal ride height to prevent pre-loading and premature wear.
- Follow up with a wheel alignment to protect tyres and keep the steering tracking straight.
So while “2024 Suzuki Splash suspension-bushes” isn’t a thing, genuine Splash models absolutely run bushes, and keeping them fresh is a smart, affordable way to keep the little Suzuki feeling planted on Aussie and Kiwi roads.
Popular questions
Do Suzuki Splash models actually use suspension bushes?
Yes—on the 2008–2014 Splash, bushes are fitted to the front control arms, rear torsion-beam mounts, and anti-roll bar. They isolate vibration and keep alignment stable under braking and cornering.
Why can’t I find suspension bushes listed for a 2024 Suzuki Splash?
Because there was no 2024 Splash. The nameplate ended years earlier. Search by the vehicle’s actual build year and VIN to find correct OE or aftermarket bushes.
What are the signs the Splash’s bushes need replacing?
Listen and feel for clunks on bumps, wandering or tramlining, braking instability, and uneven tyre wear. A workshop inspection can confirm cracked or perished rubber and excessive play.