Parts for your 2024 Suzuki Splash-Radiator hose

2024 Suzuki Splash radiator hose — is it relevant?

Short answer: a radiator hose isn’t relevant to a 2024 Suzuki Splash because there isn’t a 2024 Suzuki Splash. The model ended years earlier. Suzuki’s published model history and widely cited technical references show the Splash was produced roughly 2008–2014 for most markets, while the India-built variant (Maruti Ritz) wrapped up around 2016. With no 2024 model in Suzuki’s global line-up, there isn’t a factory‑specified 2024 Splash to fit a radiator hose to.

This isn’t about the Splash switching to an engine that doesn’t need hoses, it’s about the car no longer being made. Any listings you see online for a “2024 Suzuki Splash radiator hose” will usually be generic catalogue placeholders or mislabelled parts. If a customer actually owns a Splash, it’ll be a 2008–2014 car (or a Ritz up to around 2016), and that vehicle absolutely uses radiator hoses as part of its liquid‑cooling system.

Technically speaking, the Splash’s petrol engines (commonly the K12B 1.2‑litre in many markets) are liquid‑cooled and rely on upper and lower radiator hoses plus heater hoses to circulate coolant between the engine, radiator and heater core. So while a 2024 Splash isn’t a thing, owners of earlier Splash/Ritz models should still keep an eye on their hoses as part of regular servicing.

• Check hoses at each service interval for softness, swelling, cracks, oil contamination, or crusty deposits at the clamps.
• Replace aged hoses proactively (often around 6–10 years, or sooner if they show wear) and refresh clamps if they’ve lost tension.
• Refill with the correct spec coolant (e.g., Suzuki Super Long Life Coolant or an equivalent ethylene‑glycol OAT formula), avoid mixing colours/chemistries, and bleed air properly after work under the bonnet.

Technical sources consulted: Suzuki Splash owner’s/service literature for K‑series engines, Suzuki Motor Corporation model lists for discontinued vehicles, Maruti Suzuki communications regarding the end of Ritz production, and established model histories (e.g., workshop guides and encyclopaedic references) noting Splash production ending in 2014 (Europe) and Ritz around 2016 (India). These sources consistently support that a 2024‑model Splash was never produced, making a “2024 Splash radiator hose” non‑applicable.

FAQs

Does a 2024 Suzuki Splash exist, and does it have a radiator hose?
No. The Splash ended production years earlier (Europe around 2014, India‑market Ritz around 2016), so there’s no 2024 model to fit a hose to. Earlier Splash/Ritz vehicles do use standard radiator and heater hoses.

What radiator hose fits a Suzuki Splash from 2008–2014?
Those cars typically use upper and lower radiator hoses sized for the K‑series petrol engines (like the K12B), plus heater hoses. Exact part numbers vary by VIN and market, so matching by year/engine and confirming against the vehicle’s build plate is the right move.

How often should radiator hoses be replaced on an older Splash?
Inspect at every service. Many techs in AU/NZ swap hoses around the 6–10‑year mark or at the first sign of swelling, cracking, soft spots, leaks, or coolant crust near clamps. Always pair hose replacement with fresh coolant and new clamps if needed.