Parts for your 2024 Mitsubishi Eclipse cross-Oil filter

2024 Mitsubishi Eclipse Cross oil filter — purpose, care and change intervals

Per Mitsubishi’s Owner’s Manual for the 2024 Eclipse Cross and the Mitsubishi Motors Service Manual (Engine Lubrication section), the 1.5‑litre 4B40 turbo‑petrol engine runs a full‑flow, spin‑on oil filter as standard. Mitsubishi’s genuine parts catalogue (ASA/CAPS) also lists a canister‑type filter for this engine family (commonly 1230A040 or its superseding numbers, depending on region). So yes — this model absolutely uses an oil filter.

That filter’s job is simple but crucial: it constantly cleans the engine oil, trapping fine metal particles, carbon, and sludge so they don’t sandpaper the bearings, turbo, and camshafts. In a modern direct‑injected turbo like the Eclipse Cross, clean oil is everything — it keeps the turbocharger happy, reduces wear, and helps maintain stable oil pressure and timing performance.

For Aussie and Kiwi drivers, Mitsubishi’s scheduled servicing calls for oil and filter changes at regular intervals. Under normal use, plan on every 15,000 km or 12 months (whichever comes first). If the Eclipse Cross sees a lot of short trips, dusty roads, towing, or extended idling, treat it as severe use and halve that to about 7,500 km or 6 months. Fresh oil with a fresh filter is cheap insurance, and it keeps warranty and resale looking good.

Good practice when replacing the filter includes using the specified oil grade and API/ILSAC rating in the owner’s manual (many workshops will use a premium 0W‑20 or 5W‑30 that meets the required spec), fitting a quality filter (genuine or a known OE‑equivalent), and always swapping the sump plug washer. Lightly oil the filter gasket, spin it on until the seal contacts, then tighten a further three‑quarters of a turn by hand. After start‑up, check for leaks and confirm the oil level once the engine’s had a minute to settle.

DIYers should note the filter is accessed from underneath with the under‑cover removed, so use proper stands on level ground. If in doubt, a Mitsubishi dealer or trusted independent can handle it during routine servicing. Keeping the filter fresh helps the Eclipse Cross run quieter, smoother, and more efficiently — and your turbo will thank you for it.

• Change interval: 15,000 km/12 months, severe use: ~7,500 km/6 months.
• Use oil and filters that meet Mitsubishi’s specs for the 4B40 engine.
• Dispose of used oil and filters responsibly at a recycling point.

Popular questions

What oil filter does the 2024 Eclipse Cross use?
It uses a full‑flow, spin‑on canister filter. Genuine Mitsubishi filters for the 4B40 engine are commonly catalogued under part numbers such as 1230A040 (with regional supersessions). Always match by VIN to be sure you’ve got the correct fit for your build year and market.

How often should the oil filter be changed?
Under normal driving in Australia and New Zealand, replace the oil filter every 15,000 km or 12 months with the engine oil. If the vehicle sees short hops, dusty conditions, or towing, change it earlier — around 7,500 km or 6 months.

Can the oil filter be changed at home?
Yes, if you’re confident and equipped. You’ll need safe vehicle support, access past the under‑cover, the correct filter and oil, and a new sump plug washer. Follow the owner’s manual, warm the engine slightly, and check for leaks afterwards. If unsure, let a qualified workshop handle it.