Parts for your 2024 Mitsubishi Asx-Pedal pads

2024 Mitsubishi ASX Pedal Pads

Per Mitsubishi technical sources—the factory workshop manual for 2020–2024 ASX (RVR/Outlander Sport) and the Mitsubishi Motors ASA electronic parts catalogue—the 2024 Mitsubishi ASX is fitted with a dedicated rubber brake pedal pad, and markets with a manual gearbox also receive a clutch pedal pad. The accelerator pedal is a sealed module with a textured face, not a separate, serviceable pad. So yes, pedal pads are used on the 2024 ASX, and they’re small, inexpensive parts that make a big difference to day‑to‑day safety and feel.

Those pads do a few key jobs: they boost grip under wet boots, provide consistent pedal feel, reduce vibration, and protect the metal pedal arm from wear. The rubber compound is engineered to stay grippy across temperature swings common in Aussie and Kiwi conditions. The patterned surface channels water away, helping to meet roadworthy and WOF expectations for secure foot placement. With the pad doing the hard work, the driver gets better modulation of the brakes and less chance of a slip at the worst moment.

As part of regular servicing, the pedal pad should be inspected for glazing, hardening, cracking, tearing, or edges lifting off the pedal. If the pad feels smooth or slippery—especially when damp—or the tread blocks are flattened, it’s time to replace it. A missing or loose pad can attract a defect notice or fail a safety check. Cleaning is simple: mild soapy water and a soft brush. Avoid silicone or tyre shines, which can make the surface slick and compromise braking control.

Replacement is a quick driveway job. Lever off the old pad, wipe the pedal plate clean, then press the new pad on, hooking the bottom lip first and working around the edges. Warming the rubber slightly helps it seat, a dab of diluted dish soap can assist, but don’t use oil or grease. Genuine pads ensure the right fit and compound, while quality aftermarket options can be fine if they meet ADR requirements. If accessory alloy covers are fitted, confirm they secure firmly and don’t reduce grip.

Check yearly, replace early, and braking confidence stays spot-on and safe.

Q: Does the 2024 Mitsubishi ASX have a pedal pad on the accelerator?

A: No. The accelerator is an integrated electronic pedal with a moulded surface, so there’s no separate pad to replace. The serviceable pad is on the brake pedal (and on the clutch pedal where a manual gearbox is fitted in some markets).

Q: How do I know when to replace the brake pedal pad on my ASX?

A: Replace it when the tread is worn smooth, it feels slippery when wet, shows cracks or hardening, or the edges won’t stay seated. If your foot has slipped even once, don’t muck about—fit a new pad.

Q: Can I fit alloy pedal covers to my 2024 ASX?

A: You can, provided they’re ADR-compliant and secure firmly without reducing grip. Avoid covers that rely on flimsy clips, and make sure they won’t fail a WOF or roadworthy inspection. Grippy rubber inserts are a must.