Parts for your 2024 Mitsubishi Asx-Cabin filter

2024 Mitsubishi ASX Cabin Filter: What It Does and When to Change It

Yes, the 2024 Mitsubishi ASX uses a cabin (pollen) filter. This is confirmed by technical documentation including the 2024 ASX Owner’s Manual, which references the “air conditioning filter” in the maintenance section, and Mitsubishi Motors Australia service schedules that list A/C filter inspection or replacement at routine intervals. Major filter catalogues specific to the ASX (2010–on), used by dealerships and trade workshops across Australia and New Zealand, also specify a dedicated cabin filter for this model and year.

The cabin filter in the 2024 ASX is a small but important bit of kit that keeps the air inside the cabin cleaner by trapping dust, pollen, road grime, and other airborne nasties before they reach the vents. It helps the A/C and heater breathe easier, boosts demisting performance, and keeps odours down—especially helpful through allergy season or when the commute runs past roadworks and bush tracks.

For typical Aussie and Kiwi driving, a good rule is to replace the cabin filter every 12 months or 15,000–20,000 kilometres—sooner if the car sees a lot of gravel roads, construction zones, or smoky conditions. Mitsubishi’s service schedule includes the A/C filter as a consumable, so it’s best handled during routine servicing to keep airflow strong and the blower motor from working overtime.

Most ASX variants position the cabin filter behind the glovebox, making it a quick swap. A technician will drop the glovebox, slide out the filter cassette, and fit the new element with the airflow arrows oriented correctly. Skipping changes can lead to weak airflow, musty smells, noisy fan operation, and slower windscreen clearing on damp mornings.

There are a couple of filter options: standard particulate (great for dust and pollen) and activated carbon/charcoal types that also reduce odours and some exhaust fumes—handy for city traffic. Either way, it’s smart to avoid “running without” a filter, the evaporator core can clog up with debris, which is a much bigger job to clean later.

Between services, a quick check every few months helps—if the filter looks grey and furry or leaves drop out of it, it’s time. Those who live rurally or near the coast might shorten intervals. Keeping the cabin filter fresh keeps the ASX’s climate control feeling crisp and the interior air easier on allergies.

• Signs it needs attention: reduced airflow, lingering odours, noisy fan, foggy windows.
• Tip: Choose a carbon filter if city commuting or sensitive to odours, stick with particulate for budget-friendly, reliable filtration.

FAQs

Where is the cabin filter on the 2024 Mitsubishi ASX and how long does it take to replace?
It’s typically located behind the glovebox. Drop the glovebox, slide out the filter tray, and fit the new element with the airflow arrows in the right direction. A workshop can do it in around 10 minutes, DIY is straightforward with care.

How often should the cabin filter be changed in Australia and New Zealand?
Every 12 months or 15,000–20,000 km works well for most drivers. If the ASX regularly tackles dusty roads, urban congestion, summer bushfire smoke, or coastal salt air, consider shorter intervals.

Can the ASX cabin filter be upgraded?
Yes—activated carbon (charcoal) filters add odour reduction and can help with urban fumes. Higher-grade particulate options catch finer dust and pollen. Both fit where the standard filter goes.