Your Selected Vehicle
Parts for your 2023 Subaru Impreza-Headlights
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LED Autolamps Indicator LED Light Round Amber Lens w/Rubber Grommet and Plug 12/24v - 110AMG
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
LED Autolamps 24V Front Direction Indicator With Front Position Lamp Chrome Bracket - 200CAW/24
LED Autolamps 90 Series Red Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90RM
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
LED Autolamps Interior LED Light 12v Blue Lens Chrome Housing 10cm Cable Blister Pack - 68B
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIM
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
2023 Subaru Impreza Headlights: purpose, care, and when to replace
Headlights are absolutely fitted to the 2023 Subaru Impreza and are fully relevant to its safe operation. Technical sources including the 2023 Subaru Impreza Owner’s Manual, Australian Design Rule (ADR) 13/00 for lighting installation, and New Zealand’s Land Transport Rule: Vehicle Lighting 2004 all require compliant headlamps for on-road use. So yes—this Impreza runs proper headlights, with variants equipped with halogen projector or LED units, and many models featuring auto on/off and Steering Responsive Headlights.
On this model, the headlights do the heavy lifting after dark and in poor weather—projecting a clear, ADR/NZ-compliant beam and making the vehicle visible to others. LED-equipped variants typically deliver a brighter, whiter spread with lower power draw and longer service life, while halogen projector setups are proven, affordable and straightforward to service.
As part of regular servicing, it’s smart to give the headlights a quick once-over:
- Check operation of low beam, high beam and indicators/DRLs at each service or monthly.
- Keep the lenses clean—road grime cuts light output. Use pH-neutral wash and a soft cloth.
- Look for haze, yellowing, cracks or moisture inside the lens. Persistent fogging usually needs a new seal or assembly.
- Confirm beam aim. If the nose has been loaded up or the ride height changed, the aim can wander. Many variants have auto or manual levelling, adjusters are accessible behind the lamp unit. If unsure, have a technician set aim to ADR/NZ spec.
- Verify fuses and headlight relays in the engine bay fuse box if one side goes out.
When bulbs fail on halogen-equipped cars, replace them in pairs to keep colour and brightness matched. Don’t touch the glass—skin oils shorten bulb life, use gloves and a clean tissue. For LED headlight variants, the light source is typically integrated, individual “bulb” replacement usually isn’t possible, so diagnosis and, if required, full lamp assembly replacement is the go. Always confirm the correct part numbers and procedures in the Owner’s Manual or a service guide for the exact trim.
For longevity, ensure the charging system is healthy (over-voltage can kill bulbs), keep the headlight lenses protected with a quality sealant, and include a lighting check with every service. It’s quick, cheap insurance for clear night-time vision and a clean WOF/RWC.
Popular questions about 2023 Subaru Impreza headlights
What type of headlights does the 2023 Subaru Impreza have?
Depending on trim, it may use halogen projector headlights or LED units. Many higher-spec variants include Steering Responsive Headlights and auto on/off. The exact setup can be confirmed in the Owner’s Manual or by checking the build/spec label for the vehicle’s VIN.
How often should the headlights be replaced?
There’s no fixed interval—replace when light output drops or a globe fails. Halogen bulbs commonly last a few years of mixed driving, LEDs typically last much longer but are often non-serviceable and replaced as a full assembly if they fault. Include a beam and lens check at every service.
Can the headlight aim be adjusted at home?
Yes, but it needs care. Use the adjusters on the lamp housing and the wall/ground reference method, or the manual levelling dial if fitted. Because beam height must meet ADR/NZ requirements, many owners prefer to have a workshop set aim precisely, especially after suspension or load changes.