Parts for your 2023 Mitsubishi Eclipse cross-Wheel hubs

2023 Mitsubishi Eclipse Cross wheel-hubs: what they do and when to replace them

Wheel-hubs are absolutely relevant on the 2023 Mitsubishi Eclipse Cross. Technical sources including the Mitsubishi Motors Eclipse Cross (GK/GL) Service Manual (Front/Rear Axle and Wheel Bearing sections), the Mitsubishi ASA electronic parts catalogue, and mainstream aftermarket catalogues from NTN-SNR, Timken, and major AU/NZ parts retailers all list bolt-in wheel hub assemblies with integrated bearings and ABS encoder rings for both front and rear on FWD and S-AWC (AWD) variants.

On this model, the hub assembly is a sealed unit that supports the vehicle’s weight, keeps the wheel running true, and houses the wheel studs and the bearing. It also carries the magnetic encoder for the ABS/ESC wheel-speed sensor, which is why hub condition directly affects braking and stability systems. There’s no greasing or adjustment to do—when wear sets in, the whole hub assembly is replaced.

As part of regular servicing, a good workshop will check hub condition by spinning and rocking the wheel, listening for rumble and feeling for play. They’ll also look for ABS faults that could point to an encoder or sensor issue at the hub. Keeping the hub face clean and flat helps wheels sit square, reducing vibration and brake shudder.

• Common signs a hub is on the way out:
  • A steady hum or growl that rises with speed and often changes when loading the corner.
  • ABS/ESC warning light or erratic speed readings.
  • Wheel play when rocked at 12 and 6 o’clock, or heat at the hub after a drive.

When replacement’s needed, choosing a quality OEM-equivalent hub matters for quiet running and correct ABS behaviour. Technicians will typically renew the axle nut and hub bolts, torque everything to Mitsubishi specs, and clean mating faces so the new unit sits perfectly. A post-repair road test and scan for ABS data confirms the wheel-speed signal is clean. An alignment check is a smart add-on if the job involved suspension loosened for access.

There’s no fixed kilometre interval—many Eclipse Cross hubs last well past 100,000 km—but rough roads, big potholes, over-tightened wheel nuts, and water ingress can bring wear on earlier. If the noise starts, it’s best not to leave it, a failing hub can affect braking performance and tyre wear.

FAQs

Do the 2023 Eclipse Cross hubs have serviceable bearings?
They’re sealed hub units with integrated bearings and ABS encoder rings. There’s no greasing or preload adjustment—replacement of the complete assembly is the correct repair when wear or damage is found.

How long do wheel-hubs typically last on Aussie and Kiwi roads?
Plenty of owners see 100,000–200,000 km or more. Lifespan varies with road quality, load, and wheel/tyre choices. Impacts, water intrusion, or incorrect wheel-nut torque can shorten their life.

Is it safe to keep driving with a noisy hub?
It’s not recommended. Noise usually points to bearing wear that can worsen quickly, potentially affecting ABS readings and braking stability. Book an inspection soon and avoid long motorway trips until it’s checked.