Your Selected Vehicle
Parts for your 2022 Toyota Land cruiser-Headlight bulbs
Explore 4WD & Adventure
LED Autolamps 12/24V LED Number Plate Light LED With 0.14M Lead (2 pce) - 30BLM
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator Twin Blister - 385ARWM-2
LED Autolamps 12V Stop/Tail Strip Lamp With 10 Square LEDs Recessed Mount - 235R12
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflector 100x100x22mm - 101BAR
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Diffused Tail Light - 284ARWM-2
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
LED Autolamps 12V LED Stop/Tail/Indicator/Licence Plate Lamp with Reflex Reflector - 99ARL
LED Autolamps 12/24V Amber Marker Clear Lens Coloured LEDs Stainless Steel Bezel - 86AM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Amber Red LED Light - 282ARWM
LED Autolamps 10/30V Rear Position Marker 2 Red LEDs With 40cm Wire Blister Pack - 58RM
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
2022 Toyota Land Cruiser headlight-bulbs: relevant or not?
For the 2022 Toyota Land Cruiser (300 Series), traditional headlight-bulbs aren’t used. This model runs LED headlamp technology, so the usual halogen or HID “bulb” replacement doesn’t apply. Technical sources back this up: Toyota’s 300 Series Owner’s Manual notes the headlights are LED type and advises dealer servicing for any replacement, Toyota Australia’s grade specifications list Bi‑LED headlights (and adaptive LED systems on higher trims), and the Toyota Electronic Parts Catalogue shows complete LED headlamp assemblies and LED driver modules rather than serviceable headlight bulbs.
Why no bulbs? The Land Cruiser’s LED headlamps are engineered as integrated units for stronger, cleaner light output, lower power draw, and long service life. The beam pattern and performance come from the LED chips, optics, and drivers working as a sealed system. On higher trims with adaptive high-beam or auto-levelling, the electronics are calibrated to the vehicle, which isn’t compatible with old-school bulb swaps.
What does that mean for owners? Maintenance is more about care than replacement:
- Keep lenses clean with pH‑neutral car wash, avoid abrasive polishes that can haze the polycarbonate.
- Skip high‑pressure spray right on the headlamp seams to protect seals and vents.
- If the lens is stone‑chipped or cracked, get it checked promptly—moisture can damage LEDs and drivers.
- Any dimming, flicker, warning messages, or auto‑levelling/AHB faults should be inspected by an authorised Toyota technician. Repairs usually involve an LED module or complete assembly, not a bulb.
It’s also worth noting compliance. Throwing aftermarket “bulbs” into an LED projector housing isn’t a thing here and can breach ADR/UNECE lighting rules, glare other road users, and void warranty. If an assembly needs replacing, professional fitment and beam aim checks are recommended, and some trims may require calibration of the headlamp control systems.
Owners after extra protection can consider quality paint-protection film for the lenses and schedule periodic headlight aim checks, especially after suspension mods or heavy towing—good practice for both Aussie and Kiwi roads.
Popular questions
Does the 2022 Land Cruiser have replaceable headlight bulbs?
No. It uses LED headlamps with no conventional bulbs. If a headlight fails, the repair is typically an LED module or full headlamp assembly replacement carried out by a Toyota dealer.
Can aftermarket bulbs be fitted to make the headlights brighter?
Not applicable. The LED headlamp is a sealed system, and “bulb upgrades” don’t fit or comply. For better performance, ensure the lenses are clear and the aim is correct, any upgrades should be genuine Toyota components to keep ADR/WOF compliance intact.
What maintenance keeps the LED headlights at their best?
Regularly wash the lenses, avoid harsh chemicals, protect them from chips if you tour on gravel, and have the aim and any adaptive functions checked during servicing—especially after suspension or accessory changes.