Parts for your 2022 Mitsubishi Outlander-Pedal pads

2022 Mitsubishi Outlander pedal pads — fitment, purpose and easy upkeep

Based on Mitsubishi technical literature and parts listings, pedal pads are relevant to the 2022 Mitsubishi Outlander. The brake pedal uses a replaceable rubber pedal pad, while the accelerator is an electronic pedal module with an integrated tread surface (not a separate pad). Manual clutch pedal pads don’t apply to AU/NZ 2022 Outlander models, which are automatic. Sources referenced include the 2022 Outlander Owner’s Manual maintenance checks, the Mitsubishi Motors Electronic Parts Catalogue (ASA/EPC) listing a service part for the brake pedal pad on GN-series Outlander, and the Outlander GN service manual procedures for brake pedal and pad removal/refit.

On the 2022 Outlander, the brake pedal pad does a simple but important job: it provides grippy, cushioned contact so the driver’s shoe won’t slip in the wet, across long commutes, or on rough roads. Over time, that rubber can harden, glaze, or wear smooth. When it does, stopping feel goes downhill and the chance of a foot slipping at the worst moment goes up. That’s why a fresh pad is more than cosmetic — it’s a small safety upgrade.

As part of routine servicing, a technician should check the brake pedal pad for cracking, polishing, or thinning at the edges. Replacement is straightforward on the Outlander’s brake pedal: the old pad is levered off and a new genuine-spec pad is pressed on from the bottom edge and worked around the pedal plate. It’s a quick, tool-light job that pairs well with brake inspections.

• Tell‑tale signs it’s due: smooth or shiny surface, visible cracks, hard plastic feel, or reduced grip with wet soles.
• Recommended cadence: inspect at every service, many owners replace around 60,000–100,000 km or sooner if grip drops.
• Go genuine or quality OEM: correct fit and rubber compound matter for feel and durability.

The accelerator pedal on this model is an electronic unit, if its surface is damaged, the assembly is typically serviced as a module rather than fitting a separate pad. Keeping the pedal area clean, free of stones or mud, and avoiding harsh cleaners on rubber will help the brake pad last longer and keep pedal feel consistent.

Technical sources referenced: Mitsubishi Outlander (GN series) Owner’s Manual — Maintenance and Brake System checks, Mitsubishi Motors ASA/EPC — Group 46 (Brake) listing for “Pad, Brake Pedal” for 2022 Outlander (GN), Mitsubishi Outlander GN Service Manual — Brake pedal/pad removal and installation procedures.

FAQs

How often should the 2022 Outlander’s brake pedal pad be replaced?
It doesn’t have a strict interval, it’s condition‑based. Most workshops check it every service and replace it when the rubber is cracked, hardened, or slippery. Many owners find replacement somewhere between 60,000 and 100,000 kilometres, depending on climate and footwear.

Is the accelerator pedal pad replaceable on the 2022 Outlander?
No separate pad. The accelerator is an electronic pedal module with an integrated tread. If the surface is excessively worn or damaged, the module is inspected and, if required, replaced as an assembly per Mitsubishi procedures.

Can a worn pedal pad affect WOF/safety inspections?
It can. A smooth or perished brake pedal pad may be flagged during WOF or roadworthy checks because it compromises pedal grip. Replacing the pad is inexpensive and helps ensure safe, consistent braking control.