Parts for your 2022 Mitsubishi Eclipse cross-Oil filter

2022 Mitsubishi Eclipse Cross Oil Filter: What it does and how to look after it

Technical sources confirm the 2022 Mitsubishi Eclipse Cross is fitted with an engine oil filter and it’s absolutely relevant to routine servicing. The 2022 Owner’s Manual and the Mitsubishi Service and Warranty booklet for Australia/New Zealand specify periodic “engine oil and oil filter” replacement. Mitsubishi’s electronic parts catalogue (ASA/EPC) lists a spin-on engine oil filter for the 1.5L MIVEC Turbo (4B40) and the 2.0L (4B11) engines used in this model. Major aftermarket catalogues for AU/NZ also reference a conventional spin-on filter for this vehicle.

On the 2022 Eclipse Cross, the oil filter is the quiet achiever keeping the turbocharged petrol engine happy. It traps metal particles, soot and sludge so the oil can keep doing its job—lubricating, cooling and protecting bearings, camshafts and that turbo. A healthy filter helps maintain oil pressure and reduces wear, which is especially important on short trips, stop–start city driving, or when towing.

For most Aussie and Kiwi owners, Mitsubishi’s schedule typically calls for engine oil and filter replacement every 12 months or around 15,000 km, whichever comes first. If the vehicle sees harsher use—lots of short hops, dusty roads or frequent towing—shorten that to roughly 7,500–10,000 km. Always follow the service booklet for your specific engine and conditions.

When replacing the filter, choose a genuine Mitsubishi filter or a quality equivalent that matches the OE spec, including the correct bypass-valve setting and an anti-drainback valve. During fitment, lightly oil the gasket, spin the filter on until the seal contacts, then tighten as directed on the can (commonly about three-quarters of a turn). Don’t over-tighten. After starting the engine, check under the bonnet for any weeps and confirm oil level once it’s settled.

Good workshop practice makes a big difference:

• Warm the engine so the oil drains cleanly, then replace the crush washer on the sump plug.
• Ensure the old filter’s rubber gasket isn’t stuck to the housing.
• Use the correct oil grade specified by Mitsubishi to suit local climate and driving.
• Dispose of used oil and the filter at a proper recycling point.

Look after the oil filter and the Eclipse Cross’s engine will repay the favour with smoother running, better efficiency and long-term reliability.

FAQs

How often should the oil filter be changed on a 2022 Eclipse Cross?
For typical Australian and New Zealand driving, plan on every 12 months or around 15,000 km together with the engine oil. If the car does short trips, heavy traffic, towing or dusty work, shorten the interval to roughly 7,500–10,000 km. Always check the Service and Warranty booklet for the exact schedule that applies to your vehicle.

Does the 2022 Eclipse Cross use a spin-on or a cartridge oil filter?
The 2022 Eclipse Cross uses a conventional spin-on oil filter on both common engines (the 1.5L turbo and the 2.0L). Using a filter that meets Mitsubishi’s specifications—correct thread, gasket size and bypass pressure—is essential for proper fit and oil pressure control.

Can the oil filter be changed without changing the oil?
It’s technically possible, but not recommended. The filter and oil work as a pair. Replacing both together ensures clean oil, proper filtration and consistent service records—important for longevity and for maintaining warranty or resale value.