Parts for your 2022 Mazda Cx-5-Strut mounts

2022 Mazda CX-5 Strut Mounts

Technical sources confirm the 2022 Mazda CX-5 uses front strut mounts. The Mazda CX-5 (KF) Workshop Manual details a MacPherson strut front suspension that incorporates an upper strut mount and bearing, while the rear is a multi-link layout with separate spring and damper (no rear strut mounts). This is also reflected in Mazda’s Electronic Parts Catalogue and major aftermarket catalogues that list front strut mounts for 2017–2022 CX-5 models.

On the 2022 CX-5, the front strut-mounts do two key jobs: they secure the top of the MacPherson strut to the body, and they isolate noise and vibration so the cabin stays quiet. Built into each mount is a bearing that lets the strut turn smoothly with the steering. When they’re in good nick, steering feels light and precise, tyre contact stays consistent, and there’s less thump over rough roads—handy on Aussie corrugations or New Zealand chipseal.

Because the mount carries load and the bearing works every time the wheel turns, wear is normal over time. Common signs they’re tired include a dull clunk over bumps, a knock or creak when turning at low speed, notchy steering feel, tramlining, and uneven tyre wear on the front. During scheduled servicing, a visual check for cracked rubber, perished insulators, or loose top nuts is smart, and a road test for steering smoothness helps catch bearing issues early.

Replacement is often done in pairs and commonly paired with new front struts and boots once the vehicle has clocked higher kilometres. Many owners see long life, but harsh roads, heavy loads, or big wheels can bring the timeline forward. After any strut-mount work, a wheel alignment is recommended to keep tyre wear tidy and handling predictable.

Workshop tips for the 2022 CX-5 front strut-mounts:

• Use a quality spring compressor and follow the Mazda workshop procedure.
• Renew single-use fasteners and torque everything to spec.
• Inspect the bearing for roughness, replace if there’s any notchiness.
• Finish with a proper alignment and a short road test.

Popular question: Does the 2022 Mazda CX-5 have strut mounts front and rear?
The 2022 CX-5 has strut mounts at the front because it uses a MacPherson strut design. The rear is a multi-link suspension with separate springs and dampers, so there are no rear strut mounts on this model.

Popular question: How long do front strut-mounts typically last on a 2022 CX-5?
Service life varies with roads and loads, but many owners see well over 80,000–120,000 kilometres before issues show. Frequent gravel, speed humps, and heavier wheels can shorten that. Regular inspections during servicing help pick up wear before it affects tyres or steering.

Popular question: Is a wheel alignment needed after replacing strut-mounts?
Yes. Any time the front strut assembly is disturbed, an alignment is recommended. It helps ensure the CX-5 tracks straight, the steering wheel sits centred, and tyre wear stays even.