Parts for your 2022 Mazda Cx-5-Coil springs

2022 Mazda CX-5 Coil Springs — What They Do and When to Replace

Yes — coil springs are fitted to the 2022 Mazda CX-5. Technical sources including the Mazda Workshop Manual for the KF series (front suspension: MacPherson strut with coil spring, rear suspension: multi-link with coil spring), Mazda owner’s manual suspension descriptions, and Mazda’s model information for the 2022 CX-5 refresh all confirm coil springs are used at both ends.

On this CX-5, the coil springs carry the vehicle’s weight, set the ride height, and work with the shocks/struts to soak up bumps, maintain tyre contact, and keep the SUV level under braking and cornering. They’re tuned differently across variants (e.g., AWD, turbo petrol, trim levels) to balance comfort and handling, so choosing the correct spring rate for the VIN and spec is important.

Coil springs don’t have a fixed service interval, but they should be inspected during regular servicing or any time the wheels are off. In Australia and New Zealand, coastal air, corrugations, and gravel roads can speed up corrosion and fatigue. Look for cracked paint, red rust, a broken pigtail end, or a car that sits lower on one corner.

• Common signs they need attention:
  • Uneven ride height or sagging after loading
  • Clunks, twangs, or a metallic ping on steering or bumps
  • Excessive bounce, nose-dive, or rear squat
  • Uneven or rapid tyre wear

When replacing coil springs on a 2022 CX-5, it’s best practice to do them in axle pairs to keep handling balanced. Use springs matched to the vehicle’s build (engine, drivetrain, option weights). Replace related wear items at the same time: strut mounts/bearings, insulators, dust boots, and bump stops. Any fasteners specified as one-time-use in Mazda’s manual should be renewed, and the final tightening should be done at normal ride height to prevent bush preload. After spring work, a four-wheel alignment is recommended to protect tyres and restore steering feel.

For longevity, avoid overloading, rinse the underbody after beach runs, and keep an ear out for new noises. If a spring is broken, don’t keep driving — the sharp end can damage a tyre or strut. Have a qualified technician handle spring compression, as stored energy in the coil can be dangerous without the right tools.

• Do all 2022 Mazda CX-5 models use coil springs?
  Yes. Across the range, the CX-5 runs coil springs with a MacPherson strut front and multi-link rear. Spring rates may differ by engine, drivetrain, and trim, so parts should be matched to the specific vehicle.
• How long do CX-5 coil springs typically last in Australia/NZ?
  Many last well beyond 100,000 km, but lifespan depends on load, road quality, and corrosion. Beach driving, heavy towing, and rough tracks can shorten service life. Regular inspections pick up issues early.
• Is it safe to drive a CX-5 with a broken coil spring?
  No. A broken spring can shift and cut into a tyre or damage the strut. Park it and arrange repair — ideally replacing springs in axle pairs and checking the alignment afterwards.