Parts for your 2022 Honda Cr-v-Wheel bearings

2022 Honda CR‑V Wheel Bearings

Technical sources confirm wheel bearings are absolutely used on the 2022 Honda CR‑V. Honda’s Service Information for the 2017–2022 CR‑V (RW/RT) details sealed, unitised hub bearings at each wheel, and the Honda electronic parts catalogue lists complete hub-and-bearing assemblies (with integrated ABS encoder) for both front and rear corners. Major bearing manufacturers’ application charts for this model also specify sealed hub units rather than serviceable tapered rollers.

On the 2022 CR‑V, the wheel bearings are sealed hub assemblies that let the wheels spin smoothly with minimal friction while supporting the vehicle’s weight and cornering loads. They also keep the ABS and stability systems happy by maintaining precise wheel speed signals via the integrated magnetic encoder.

Because they’re sealed-for-life, there’s no periodic greasing. As part of normal servicing, the smart move is to check for early signs of wear and protect them from the harsh stuff Aussie and Kiwi roads can throw at them.

• Listen on road tests for a steady humming or growl that rises with speed.
• Check for play at 12 and 6 o’clock with the wheel off the ground.
• Spin the wheel and feel for roughness, notchiness, or drag.
• Watch for ABS warning lights after pothole or kerb strikes.

If replacement’s needed, each CR‑V corner uses a bolt-in hub unit. A workshop will remove the brake calliper and rotor, disconnect the sensor if required, unbolt the hub from the knuckle, and fit a new quality assembly. It’s not a “pack the bearings with grease” job