Parts for your 2021 Toyota Land cruiser-Oil filter

2021 Toyota Land Cruiser oil filter — purpose and servicing

Yes, the 2021 Toyota Land Cruiser is fitted with an engine oil filter. This is confirmed by Toyota’s Owner’s Manual and Repair Manual for the 200 Series (3UR‑FE 5.7L petrol and 1VD‑FTV 4.5L V8 diesel), as well as Toyota Genuine Parts catalogues that list the oil filter as a scheduled service item. Depending on engine, it uses a cartridge‑style element housed in an alloy canister (common Toyota part references include 04152‑YZZA1 for many 3UR‑FE applications and 04152‑38010 for 1VD‑FTV diesel). So, an oil filter is absolutely relevant to the 2021 LandCruiser.

The oil filter’s job is simple but critical: trap fine metal particles, carbon, and dust so clean oil can maintain pressure, cool and lubricate bearings, cams, and turbochargers, and keep variable valve timing hardware happy. Clean oil also helps the engine hold spec fuel economy and keeps cold starts quiet. On a Land Cruiser that tows, tours outback roads, or idles around town, the filter is the frontline defence against accelerated wear.

For Aussie and Kiwi conditions, owners should plan to replace the oil filter at every engine oil change, typically at 10,000 km or 6 months, whichever comes first, or sooner if mainly towing, driving dusty tracks, or doing lots of short trips. Always match the filter to the exact engine and VIN, and grab new O‑rings for the canister cap and drain, as these are single‑use seals.

Good practice when servicing a 2021 Land Cruiser oil filter includes:

• Using a quality OEM or equivalent filter element and the correct spec oil.
• Draining the canister via its small plug (where fitted), replacing O‑rings, lightly oiling new seals, and tightening the cap to the specification in the Toyota repair manual.
• Starting the engine to confirm the oil warning light goes out promptly, then checking for leaks.
• Disposing of used oil and the old element at a recycling facility.

Signs the filter and oil need attention include an oil pressure warning, noticeably darker oil soon after a change, or seepage around the filter housing. If in doubt, or if the canister cap looks stubborn, a workshop with the correct cup wrench and torque tools will make quick, clean work of it.

Popular questions about 2021 Toyota Land Cruiser oil filters

What oil filter does a 2021 Land Cruiser use?

It depends on the engine. Many 3UR‑FE petrol models take a Toyota cartridge element commonly referenced as 04152‑YZZA1, while 1VD‑FTV V8 diesels often use 04152‑38010. Always confirm by VIN because regional specs can vary, especially near model run‑out or special editions.

How often should the oil filter be changed in Australia or New Zealand?

As a rule of thumb: every 10,000 km or 6 months with the engine oil, whichever comes first. If you’re towing, working in dusty areas, or mostly doing short trips, shorten the interval. Follow the Toyota service schedule for your exact engine and usage.

Can a DIYer change the Land Cruiser’s oil filter at home?

Yes, with the right tools. You’ll want a proper cup‑style filter‑housing wrench, new O‑rings, the correct oil, and a torque wrench. Work on a cool engine, keep it tidy, and tighten to Toyota’s spec. If the housing is stubborn or you don’t have the tools, a trusted mechanic is the go.