Parts for your 2021 Honda Cr-v-Pedal pads

2021 Honda CR-V pedal pads: what they do and when to replace them

Pedal pads are fitted to the 2021 Honda CR‑V. Honda’s Electronic Parts Catalogue for the 2017–2022 CR‑V (RW) lists a dedicated “Pad, Brake Pedal” (commonly referenced under the TLA series part numbering), and the Honda Owner’s/Service information notes the need for a clean, non‑slip brake pedal surface. These technical references confirm the CR‑V uses a replaceable rubber brake pedal pad, while the accelerator has a textured, non‑slip face integrated with the pedal arm. No clutch pedal is present on the CVT‑equipped 2021 CR‑V.

On a 2021 CR‑V, the brake pedal pad is a simple bit of tough rubber that gives the driver a grippy, comfortable surface underfoot. It’s there to stop the foot slipping in the wet, reduce vibration, and protect the underlying metal pedal. Over time, the rubber can harden, glaze, or wear smooth, and that’s when braking feel and foot security can suffer — especially with wet shoes or muddy work boots common around Aussie and Kiwi roads.

As part of routine servicing (every 10,000 km/12 months is a handy rule for local conditions), the brake pedal pad should be checked and cleaned. A quick wipe with mild soapy water removes grit and road film, avoid silicone or oily dressings that make the surface slippery. If the pad shows cracks, polishing, or thinning — or if the driver notices any slip — it’s time to replace it. The job is straightforward: the old pad peels off the pedal face, and a genuine Honda pad stretches over the metal plate and seats into the lip. Using the correct pad ensures the right fit and maintains the designed pedal feel.

The accelerator pedal on the 2021 CR‑V typically uses an integrated, textured face rather than a separate rubber cover. If it’s damaged or excessively worn, the fix is usually to replace the pedal assembly, ensuring the electronic throttle components remain within spec. During servicing, a technician will confirm the accelerator’s surface isn’t slick and that it returns smoothly without binding.

• Tell‑tale signs it’s time for a brake pedal pad: shiny/glazed rubber, visible cracks, uneven wear, or any foot slip in the wet.
• Use a genuine‑spec pad for the CR‑V to keep the fit snug and the surface grippy.
• Keep cleaners simple — no oils, silicone sprays, or greasy protectants.

FAQs

What pedal pads does a 2021 Honda CR‑V have?
The 2021 CR‑V has a replaceable rubber brake pedal pad and a textured accelerator pedal face that’s integrated into the pedal assembly. There’s no clutch pedal on the CVT models sold in Australia and New Zealand.

How often should the brake pedal pad be replaced?
There isn’t a fixed kilometre interval — replace it when it’s cracked, hardened, or slippery. As a guide, have it inspected at each service (around every 10,000 km/12 months), and replace at the first sign of reduced grip.

Can universal pedal covers be used?
It’s best to avoid universal slip‑on covers. They can shift around or reduce pedal feel. A genuine Honda brake pedal pad is designed to lock onto the pedal plate properly and keep the non‑slip surface exactly where it needs to be.