Parts for your 2021 Haval H6-Pedal pads

2021 Haval H6 Pedal Pads

Technical sources indicate pedal pads are indeed used on the 2021 Haval H6. The GWM/Haval H6 Workshop Manual (Brake Controls section) and the GWM electronic parts catalogue list a replaceable rubber brake pedal pad for this model year. Further, Australian Design Rules (ADR 31/03 – Brake Systems) and UN Regulation No. 13‑H require a non‑slip operating surface for brake pedals, which manufacturers typically achieve with a dedicated pedal pad. For Australia and New Zealand, the 2021 H6 is an automatic, so there’s no clutch pad, the accelerator is an electronic pedal with an integrated tread face, while the brake uses a separate, serviceable rubber pad. So yes—pedal pads are relevant and fitted.

On the 2021 Haval H6, the brake pedal pad’s job is simple but critical: provide a grippy, stable surface so the driver’s shoe won’t slip—wet boots, sandy thongs, or muddy workwear and all. The rubber compound and tread pattern bite into the sole, giving consistent feel and control when braking. Over time, that rubber can harden, glaze, crack, or wear smooth, especially if the car sees lots of stop‑start kilometres or beach and farm use.

As part of routine servicing, it’s smart to inspect the brake pedal pad every 10,000–15,000 km (or at least annually). Look for shiny spots, flattened ribs, hardening, or any lifting at the edges. If it’s slippery or the pattern’s mostly worn away, replacement is inexpensive and quick—an easy safety win that can also affect roadworthy/WOF assessments if the surface is missing or too slick.

• Signs it’s time to replace:
  • Smooth or shiny rubber with reduced grip
  • Cracks, splits, or hard plastic‑like feel
  • Pad not sitting squarely or corners lifting
• Fitting tips:
  • Confirm the correct H6 pad (model year specific)
  • Clean the metal pedal plate, no silicone or oily residue
  • Warm the new pad slightly, hook the top lip first, then work it over evenly until all edges are fully seated

Owners who prefer metal dress‑up covers should ensure any accessory retains a non‑slip face (usually rubber inlays) and clamps securely without fouling the pedal travel. For the accelerator, the face is typically integral, if damaged, replace the cover or the pedal assembly per the workshop manual.

Popular questions

How often should the brake pedal pad be replaced on a 2021 Haval H6?
There’s no fixed time limit, but checking at each service (every 10,000–15,000 km) is good practice. Replace when the rubber goes hard or smooth, when cracks appear, or whenever grip feels compromised—especially if the vehicle regularly sees wet or gritty conditions.

Is it legal to fit aftermarket metal pedal covers?
Generally yes, provided the brake pedal retains a non‑slip surface and the cover is firmly secured without affecting pedal movement. For roadworthy/WOF, anything slippery, loosely attached, or that alters pedal travel could be a fail—stick with quality covers that include rubber inlays and proper fixings.

Does the accelerator pedal on the H6 have a removable pad?
On the 2021 Haval H6, the accelerator is an electronic (drive‑by‑wire) unit with an integrated tread face. It usually isn’t a separate rubber pad like the brake. If the face is worn or damaged, follow the workshop procedure to replace the pedal cover (if serviceable) or the full pedal assembly.