Your Selected Vehicle
Parts for your 2020 Volvo Xc60-Headlights
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps 12/24V Reverse Light 200x50mm With 25 LEDs Black Bracket - 200BWM
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
LED Autolamps 12V Round Stop/Tail Lamp With Red Lens Recessed Mount - 102R
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMB
2020 Volvo XC60 Headlights
Headlights are absolutely relevant and fitted to the 2020 Volvo XC60. According to Volvo Cars technical material and the 2020 XC60 Owner’s Manual, this model is factory-equipped with LED headlamps featuring Volvo’s signature “Thor’s Hammer” daytime running lights, automatic levelling, and functions such as Active High Beam, with optional Active Bending Lights depending on grade and market. These sources also note that the LED light modules are sealed units, so conventional bulb replacement is generally not applicable.
On a 2020 XC60, the headlights do the heavy lifting for visibility and safety: bright, crisp LED output helps the driver see the road, road signs, and hazards sooner, while remaining efficient and compliant with local regulations across Australia and New Zealand. The daytime running lights boost conspicuity in daylight, and the automatic high-beam function manages forward glare so oncoming traffic isn’t dazzled. Where fitted, Active Bending Lights swivel the beam through corners to better light the apex and verges.
Because the 2020 XC60 uses LED headlamp units, “replacement” typically means diagnosing the module and, if faulty, replacing the assembly rather than a globe. That’s best handled by a Volvo dealer or a qualified auto electrician with the right diagnostic gear. However, there’s still plenty an owner can keep on top of as part of routine servicing to extend headlight performance and avoid dramas.
- Keep lenses clean: remove road film, bug splatter, and salt spray with a pH-neutral wash to preserve clarity and beam pattern.
- Check aim and levelling: after suspension work, towing setup changes, or a heavy load, have the beam alignment checked on a headlight aimer.
- Software and calibration: ensure the car’s software is up to date so Active High Beam and bending functions operate as intended.
- Moisture watch: a light mist inside the lens can be normal after wet weather, persistent droplets or pooling warrants a seal inspection.
- Washer and wiper care (if equipped): keep washer fluid topped and nozzles clear to prevent grime build-up on the lenses.
Signs that call for professional attention include flickering, uneven brightness, warning messages, or significant condensation. Given the long service life of LEDs, these symptoms usually point to a control module, wiring, or sealing issue rather than a simple bulb.
Can the 2020 XC60 headlight “bulbs” be replaced at home?
The main headlamps are LED modules and not conventional replaceable globes. If a fault occurs, diagnosis and replacement of the sealed unit is typically required, which is a workshop job. Many other front lighting functions on this model are also LED, limiting DIY bulb swaps.
How is headlight aim adjusted on this model?
The XC60 features automatic levelling, but beam alignment can still be set mechanically and verified with a beam setter. After suspension changes, collisions, or heavy towing/load use, getting a workshop to check and adjust alignment keeps the beam legal and effective.
Why do the headlights sometimes fog up inside?
Temporary misting can occur as the lamp breathes and temperature changes, this usually clears after the lights have been on for a while. Persistent condensation, visible droplets, or water pooling indicates a sealing or vent issue and should be inspected.