Parts for your 2020 Toyota Land cruiser-Cabin filter

2020 Toyota LandCruiser Cabin Filter

Yes — the 2020 Toyota LandCruiser (200 Series) is fitted with a cabin air filter. This is confirmed by Toyota’s Owner’s Manual (Air Conditioning Filter section), Toyota’s service and warranty schedules in Australia and New Zealand that list inspection/replacement of the “air conditioning filter”, and Toyota’s Electronic Parts Catalogue, which lists genuine filter part numbers commonly supplied for this model (such as 87139-YZZ20 and 87139-58010, depending on market/build).

For a big touring wagon that often sees dusty tracks, the cabin filter pulls its weight. It traps fine dust, pollen, soot and other airborne nasties before they reach the vents, helping the air-con breathe easier and keeping the cabin fresher. It also protects the HVAC evaporator from clogging up with debris, which can save on noise, smells and foggy windows down the track.

Servicing-wise, it’s a quick win. As a rule of thumb for Aussie and Kiwi conditions: check it every 15,000 km or 12 months, and replace about every 30,000 km — earlier if the LandCruiser spends time on unsealed roads, in the outback, or in bushfire smoke. If there’s a musty odour, weak airflow at the same fan speed, or the fan sounds like it’s working harder than usual, it’s probably due.

• Location: behind the glovebox in the HVAC intake.
• Swap steps: drop the glovebox, unclip the access cover, slide the old filter out, fit the new one with airflow arrows in the right direction, reassemble.
• Filter choices: standard paper media is fine, an activated carbon type helps with odours and fumes.

Keeping this filter fresh makes long hauls more comfortable and reduces the load on the blower motor and evaporator. It’s a simple logbook item your technician can sort at service time, or an easy DIY if you’re handy. When ordering, match by VIN or build month to ensure the correct part number and size.

Technical sources referenced: Toyota LandCruiser 200 Series Owner’s Manual (MY2020) “Air conditioning filter”, Toyota Australia/New Zealand Service & Warranty logbook schedules, Toyota Electronic Parts Catalogue listings for LC200 cabin filter assemblies.

Popular questions

Where is the 2020 LandCruiser’s cabin filter and how long does it take to change?
It sits behind the glovebox in the HVAC intake. Once the glovebox is dropped, the access cover pops off and the filter slides out. Most owners or technicians can do it in about 5–10 minutes with no special tools.

How often should it be replaced in Australia or New Zealand?
Inspect every 15,000 km or 12 months and replace around 30,000 km. If you drive in red dust, on gravel, or through smoke and pollen season, replace more frequently to keep airflow and air quality up.

What part number fits a 2020 LandCruiser?
Genuine Toyota filters typically reference 87139-YZZ20 or 87139-58010 for the 200 Series, depending on market and build month. Always confirm against the VIN or parts catalogue to be sure you’re getting the right one.