Your Selected Vehicle
Parts for your 2020 Subaru Outback-Wiper blades
Explore 4WD & Adventure
2020 Subaru Outback wiper blades
Wiper blades are absolutely fitted to the 2020 Subaru Outback. Subaru’s MY2020 Outback Owner’s Manual details both front and rear wiper blades, along with care and replacement procedures, and the factory service literature covers the wiper system as part of scheduled maintenance. Australian and New Zealand roadworthiness requirements also call for an effective windscreen wiping system, so these parts are very much relevant to this model.
On a 2020 Outback, the wiper blades do the heavy lifting in rain, road spray, sea mist and dust, keeping the wide windscreen and rear glass clear so the EyeSight cameras and the driver see what’s ahead. Modern beam-style blades maintain even pressure across the glass, helping reduce streaks and chatter. Because they live in tough Aussie and Kiwi conditions—UV, heat, cold snaps, salt air and road grime—the rubber gradually hardens and wears.
As part of routine servicing, it’s smart to plan on replacing the blades every 6–12 months, or sooner if there’s streaking, squeaking, juddering, or split edges. High-mileage commuters and coastal drivers may need fresh blades more often. Don’t forget the rear wiper—on SUVs like the Outback it cops a lot of dust and spray and often wears faster than the fronts.
Easy care goes a long way. Give the rubber a gentle wipe with a damp microfiber cloth when you wash the car, and keep the glass clean with proper windscreen cleaner. Avoid running wipers on a dry or frosty screen, if there’s ice or heavy frost, let the demister do its thing first. When fitting replacements, use the correct adaptors for the Outback’s wiper arm style and, where applicable, use the vehicle’s wiper “service position” as described in the Owner’s Manual so the arms lift clear of the bonnet without risk of chipping paint.
- Inspect monthly for nicks, frayed edges and hardened rubber.
- Watch for missed patches, haze or noisy operation—these are change cues.
- Top up washer fluid with a proper additive, plain water can promote smearing.
- Replace blades in pairs so wipe quality stays balanced left to right.
- Keep a note of the change date and check at each service interval.
Right blades, fitted correctly, keep the 2020 Outback safer and less stressful to drive—rain, hail or shine.
How often should 2020 Subaru Outback wiper blades be replaced?
Most owners will see the best results by changing blades every 6–12 months, or whenever there’s streaking, chatter or squeaks. Hot summers, coastal air and lots of night driving in bugs and spray can shorten that interval. If in doubt, replace—fresh blades are cheap insurance for clear vision.
What size wiper blades does the 2020 Outback use?
The driver’s and passenger’s blades are different lengths, and there’s a shorter rear blade as well. Check the Owner’s Manual, the size guide on quality aftermarket packaging, or use your rego/VIN with a parts lookup to get the exact sizes for your trim level.
Can these be changed at home, or should a workshop do it?
They’re DIY-friendly if the correct adapters are used and the arms are placed in the service position (as described in the Owner’s Manual) to avoid contacting the bonnet. If unsure, a workshop can fit and test them during a routine service in a few minutes.