Parts for your 2020 Honda Cr-v-Wheel hubs

2020 Honda CR‑V Wheel Hubs

Wheel hubs are absolutely fitted to the 2020 Honda CR‑V. Technical sources such as the Honda CR‑V (2017–2022) service manual procedures for “Front/Rear Hub Unit Removal/Installation”, OEM parts catalogues listing complete hub–bearing units for this model year, and major aftermarket catalogues (e.g., Timken and NTN/NSK) all confirm the CR‑V uses bolt‑in, unitised hub assemblies front and rear. So, wheel‑hubs are relevant to every 2020 CR‑V on Australian and New Zealand roads.

The hub assembly’s job is to let the wheel and brake rotor spin freely while carrying vehicle load. It houses a sealed bearing, press‑fitted into a flange with wheel studs, and usually includes the magnetic encoder for ABS/traction control. On the 2020 CR‑V, these hubs are sealed for life—there’s no greasing or adjustment—so care focuses on inspection and timely replacement when wear shows up.

As part of routine servicing, a technician should:

• Road test for humming or growling that changes with speed and during gentle lane‑changes.
• Check for play or roughness with the wheel off the ground (hand at 12 and 6 o’clock), and spin for noise.
• Scan for ABS faults and inspect the sensor faces