Your Selected Vehicle
Parts for your 2020 Haval H6-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2020 Haval H6 interior bulbs — purpose, replacement and care
Based on the 2020 Haval H6 Owner’s Manual (Interior Lighting section) and dealer electronic parts catalogues for the H6 model years around 2020, this vehicle is fitted with interior lighting across the cabin and cargo area. Depending on trim, these are either replaceable globes (wedge or festoon) or integrated LED modules. So interior bulbs are definitely relevant for the 2020 H6.
Interior bulbs in the H6 do more than light up the cabin. They make night-time entry safer, help find gear on the back seat, and support features like theatre-dimming with the door switches. Good, bright and even interior lighting lifts day-to-day usability, especially on those early-morning starts and late-night runs across Aussie and Kiwi roads.
When it comes to servicing, it’s smart to check the courtesy, map, vanity and cargo lamps every 12 months or 15,000 km. If a lamp is dull, intermittent or dead, replace it promptly to avoid fumbling in the dark. Many 2020 H6s use LEDs from factory, some trims use conventional globes. If your car has replaceable globes, choose quality parts that match the original wattage and colour temperature (legal white only). If your car has integrated LED modules, the whole lamp assembly is typically replaced rather than a single globe.
- Switch the lights off and let hot globes cool before removal.
- Use a plastic trim tool to pop the lens to avoid marking the headlining.
- Don’t touch halogen glass with bare fingers, oils can shorten life.
- For LED upgrades, confirm polarity and pick CANBUS-friendly units to avoid faint glowing.
- If multiple interior lights fail, check the relevant fuse and door switch inputs.
If a lamp housing shows moisture or corrosion, replace the assembly and check the seal. Where LEDs are factory-fitted and non-serviceable, expect to swap the complete lamp, no programming is usually required. If courtesy lights stay on or don’t fade correctly, that’s often a door-ajar sensor or body control module logic issue—worth a proper diagnostic rather than more bulb swaps.
Given our hotter Aussie and NZ climates, pick LEDs rated for 12–14.4 V with good thermal management. That keeps flicker at bay and maintains consistent brightness over the long haul.
Popular questions
Does the 2020 Haval H6 use LED interior lights?
Many 2020 H6 trims use factory LED interior lamps, while others have conventional replaceable globes. If your lamp doesn’t list a bulb type and looks like a sealed board behind the lens, it’s likely an integrated LED module.
What bulb type fits the front map lights?
It varies by trim and market. Commonly it’s a small wedge (often referred to as T10/W5W) or a festoon style. Check the owner’s manual or read the markings on the existing globe, or take the old one to a parts counter to match.
Why do my new LED interior bulbs glow faintly when off?
That faint glow is usually due to the vehicle’s body control module using low monitoring current or PWM. Use CANBUS-compatible LEDs or an appropriate load resistor, and make sure polarity is correct. The glow won’t harm the car but can be annoying without the right bulbs.
