Parts for your 2019 Toyota Vitz|yaris-Cabin filter

2019 Toyota Vitz/Yaris Cabin Filter — What It Does and When to Change It

Technical sources confirm the 2019 Toyota Vitz/Yaris is fitted with a cabin air filter. Toyota’s official Repair Manual (TIS) for the XP130-series Yaris/Vitz specifies an “Air Conditioning Filter (Clean Air Filter)” and provides a removal/installation procedure behind the glovebox. Toyota’s Electronic Parts Catalogue lists the component under PNC 87139 (common service part numbers include 87139‑0D010/87139‑YZZxx), and Toyota Australia/New Zealand service schedules include inspection and periodic replacement of the air conditioning filter. So yes—this model absolutely uses a cabin filter.

In this Vitz/Yaris, the cabin filter sits in a slide-out tray behind the glovebox and strains dust, pollen, soot and road grime before the air reaches the cabin. That keeps the evaporator cleaner, helps the demister work efficiently, and makes the air nicer to breathe—especially handy during allergy season or when driving in city traffic.

For local conditions, it’s smart to check the filter every 12 months or 15,000 km, and replace it about every 15,000–30,000 km, sooner if you drive on dusty roads or through bushfire smoke. Toyota’s maintenance guidance for this generation includes regular inspection, many workshops in Australia and New Zealand now treat cabin filters as routine service items because a blocked element can reduce airflow, make the fan work harder, and leave the A/C feeling a bit underdone.

Signs it’s time to swap the filter include weak airflow on higher fan speeds, musty smells when the A/C starts, or visible dirt and leaves in the media. A fresh carbon-impregnated filter can help take the edge off odours and fumes, a standard particulate filter is fine for general use and still traps the bulk of dust and pollen.

DIY replacement is straightforward: drop the glovebox (release the side damper and squeeze the stops), slide out the filter tray, note airflow direction arrows, and fit the new element the same way. Don’t vacuum or wash the old filter—once it’s loaded up, replacement is the go. Keeping this little filter fresh helps the Vitz/Yaris’s HVAC run quieter and cooler, preserves evaporator cleanliness, and keeps the cabin air crisp on long Kiwi and Aussie drives.

• Recommended check: every 12 months/15,000 km
• Typical replacement: 15,000–30,000 km, sooner in dusty or smoky conditions
• Location: behind the glovebox in a slide-out tray

Popular questions

Where is the cabin filter on a 2019 Toyota Vitz/Yaris?
It’s behind the glovebox. Open the glovebox, unclip the side damper, squeeze the stops to lower it fully, then slide the rectangular filter tray out of the HVAC housing. Swap the element with the airflow arrows in the same direction and refit.

How often should it be replaced in Australia or New Zealand?
Plan on inspecting it every service (about 12 months/15,000 km) and replacing it every 15,000–30,000 km. If you’re often on unsealed roads, in heavy traffic, or during high pollen/bushfire periods, change it sooner for the best airflow and air quality.

Which type should they choose—standard or carbon?
A standard particulate filter suits most drivers and catches dust and pollen well. An activated carbon filter adds odour and fume reduction—handy for city commuting or sensitivities. Both fit the same tray and install the same way.