Parts for your 2019 Toyota Corolla-Gas struts

2019 Toyota Corolla gas struts — what’s fitted and how to look after them

Based on technical sources, gas struts are fitted to the rear hatch on the 2019 Toyota Corolla Hatch, but not to the bonnet or the 2019 Corolla Sedan’s boot. The Toyota Repair Manual for the E210 Corolla details a bonnet support rod (not gas struts), while the Toyota Electronic Parts Catalogue (EPC) lists gas-charged “Back Door Stay” units for hatch variants. For the 2019 Corolla Sedan, the EPC shows a torsion spring/hinge system for the boot lid rather than gas struts. So, gas struts are relevant to the hatch’s tailgate, but not to the bonnet or the sedan’s boot.

On the 2019 Toyota Corolla Hatch, the gas struts take the heavy lifting out of opening the rear hatch and keep it safely propped while loading the week’s shop or the footy gear. They’re compact, gas-charged dampers that balance the weight of the tailgate, making the hatch feel light and controlled through its travel. When in top nick, they open smoothly, hold firm at full extension, and close without a fight.

Over time, seals age, pressure drops, and performance tails off—especially with lots of hatch use, hot summers, and cold mornings. Replacing the struts as a pair keeps the lift and hold balanced left-to-right, and helps the latch and hinges live a longer, happier life. During regular servicing, it’s worth giving the shafts a quick wipe with a clean, dry cloth. Don’t spray lubricants on the shaft or seal, that can attract grit and shorten their life. If the hatch feels heavy or won’t stay up, book a replacement pronto—no one wants a tailgate tapping them on the back of the head.

• Hatch rises slowly or needs a helping hand.
• Won’t stay up, especially in cold weather.
• Visible oil misting on the strut body or shaft.
• Hissing, binding, or uneven lift from side to side.

When fitting new units, choose Corolla E210 hatch-specific struts with the correct force rating. Quality aftermarket or genuine parts both do the job, focus on fit and warranty. Always support the hatch with a prop or helper, then release the retaining clips at the ball sockets with a small flat screwdriver and swap the struts—one side at a time. Clip them on firmly, check for secure seating, and verify smooth operation. In Aussie and Kiwi conditions, many sets last 5–8 years, but usage varies—let the symptoms guide timing. Dispose of old gas struts responsibly, as they’re pressurised.

Popular questions

Does the 2019 Corolla have bonnet gas struts?
No. The 2019 Corolla (E210) uses a bonnet support rod. Gas struts are fitted to the rear hatch on hatchback models only. The sedan’s boot uses a torsion spring system.

How long do hatch gas struts usually last on a 2019 Corolla?
Typically 5–8 years in Australian and New Zealand climates, depending on use and exposure. If the hatch stops holding up or rises sluggishly—especially when it’s cold—it’s time for new ones.

Can just one gas strut be replaced?
It’s technically possible, but not recommended. Replacing both keeps lift force balanced and avoids twisting loads on the hatch, hinges, and glass.