Your Selected Vehicle
Parts for your 2019 Subaru Impreza-Exterior bulbs
2019 Subaru Impreza exterior bulbs: purpose, care and when to replace
Exterior bulbs are absolutely relevant on the 2019 Subaru Impreza. Technical sources including the Subaru Impreza 2019 Owner’s Manual and Subaru Service Manual (Lighting section), as well as industry bulb catalogues from major manufacturers, confirm the car uses a mix of replaceable halogen/wedge bulbs and, depending on trim, some sealed LED units. Base and mid-spec models commonly run halogen headlamps, while higher trims use LED headlamps, indicators, reverse, number plate and many park/position lamps remain conventional replaceable bulbs in most AU/NZ specs.
These exterior bulbs do the heavy lifting for safety and compliance: helping the driver see at night and in poor weather, and making the vehicle visible to everyone else. That includes headlights, DRLs, parkers, indicators, stop/tail, reverse, rear fog (where fitted), side repeaters and number plate lights. Even if a model has LED headlamps, it still relies on several small serviceable bulbs elsewhere.
Common fitments vary by trim and market, but for many 2019 Impreza variants you’ll encounter items like H11 (low beam), 9005/HB3 (high beam), W5W/T10 (park/number plate), WY21W/T20 amber (turn), W16W/T15 (reverse) and W21/5W (stop/tail). Some lamps may be LED-only modules (e.g., DRLs or headlamps on premium trims) and are replaced as assemblies if they fail.
- Check operation monthly: headlights (both beams), indicators, brake and reverse lights.
- Replace in pairs where practical for even brightness and colour.
- Use ADR/UNECE-compliant, quality bulbs, avoid super high-wattage types that can overheat housings.
- Don’t touch the glass on halogen bulbs, use clean gloves and keep the quartz spotless.
- Inspect seals and caps to prevent moisture ingress, fix any fogging promptly.
- After headlight bulb changes, confirm beam aim, get a workshop to align if needed.
- LED headlamp/DRL modules are not user-serviceable—book a qualified technician.
- Switch off the car and allow lamps to cool.
- Open the bonnet or access panel, note bulb type and orientation.
- Swap like-for-like, seat the bulb fully, refit caps, and test all lights.
For road trips around Australia or New Zealand, carrying a small spare bulb kit is a smart move. If bulbs blow frequently, have the charging system and earths checked, and ensure the correct caps and gaskets are fitted to keep moisture out. This advice aligns with Subaru service literature and typical AU/NZ market specifications for the 2019 Impreza.
Popular questions about 2019 Subaru Impreza exterior bulbs
What headlight bulb does a 2019 Subaru Impreza use?
It depends on the trim. Many AU/NZ 2019 Impreza models use H11 for low beam and 9005 (HB3) for high beam. Premium trims with LED headlamps use sealed LED units that are replaced as an assembly rather than a simple bulb swap. Always confirm against the vehicle’s build plate and Owner’s Manual.
Can owners replace exterior bulbs at home?
Yes, most halogen and wedge bulbs (parkers, indicators, number plate) are DIY-friendly with basic tools. LED headlamp or DRL modules, however, are not user-serviceable—those should be handled by a qualified technician to avoid damage and to maintain correct aim and sealing.
Why do my bulbs keep blowing?
Common causes include touching the glass on halogens, vibration from loose fittings, moisture inside the housing, poor-quality bulbs, or charging-system voltage spikes. Use reputable ADR-compliant bulbs, check caps and seals, and get the alternator output and earths tested if failures are frequent.
